top of page

Cylindrical 21700 High-Power Cell

Reliance RU25

Cylindrical 21700 cell delivering 2.5 Ah capacity and 150 A maximum discharge rate.

Overview

The Reliance RU25 is a high-power lithium-ion cylindrical 21700 cell designed for applications that demand very high continuous discharge rates. Released in 2026 and with the manufacturer based in China, this cylindrical 21700 cell delivers 2.5 Ah capacity and 9 Wh of energy at a nominal voltage of 3.6 V, with a maximum continuous discharge capability of 150 A, making it well suited to high-power systems operating under aggressive discharge profiles. With a continuous discharge rate of 60 C, the RU25 is among the highest-rated cells for peak power delivery in the Voltt library.

Key Features

  • Extremely high discharge rate: 150 A continuous (60.0 C)

  • Applications: aviation, motorsports, drones

Reliance RU25 21700 cylindrical lithium-ion battery cell, 2.5 Ah, 150 A continuous

Technical Specifications from the Manufacturer

Parameter
Manufacturer
Reliance
Model
INR21700-RU25
Type
Li-ion
Form factor
Cylindrical 21700
Country of origin
China
Release year
2026
Nominal voltage
3.6
Energy capacity [Wh]
9
Capacity [Ah]
2.5
Gravimetric energy density [Wh/kg]
​
Gravimetric power density [W/kg]
​
Max continuous discharge [A]
150
Volume [cm³]
​
Mass [g]
​
Positive electrode (cathode)
Ni-based
Negative electrode (anode)
​
Value
Gavin 2025 - 2025-06-12T154701_edited.png

Explore and compare 550+ cells for free in our online database

Applications & Use‑Cases

The Reliance RU25 is well suited to the following applications due to its cylindrical 21700 form factor and high power performance.

  • Aviation: Requires high specific energy for extended flight duration, high power-to-weight ratio for climb performance, and reliable operation across wide temperature ranges at altitude.

  • Motorsports: Demands sustained high discharge under competitive load profiles, rapid transient response for acceleration, and thermal stability to maintain performance during race conditions.

  • Drones: Demands high gravimetric power density for thrust and payload capacity, rapid current response for flight control, and stable voltage delivery across dynamic flight profiles.

  • General Applications: Suitable for applications requiring reliable lithium-ion performance with proven cycle life, consistent capacity delivery, and operational safety across diverse use cases.

Performance & Model Data

Below are modelled performance metrics for the Reliance RU25 across key indicators, including constant current behaviour, rate capability, temperature dependence, and available power under representative drive cycle conditions.

Constant Current Voltage

Access Reliance RU25 constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not RU25 data.)

Access Reliance RU25 constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not RU25 data.)

Constant Current Temperature

Access Reliance RU25 thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not RU25 data.)

Access Reliance RU25 thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not RU25 data.)

Pulse Power Behaviour

Access Reliance RU25 pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not RU25 data.)

Access Reliance RU25 pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not RU25 data.)

Dynamic Profile Response

Access Reliance RU25 mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not RU25 data.)

Access Reliance RU25 mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not RU25 data.)

Gavin 2025 (25).png

Run your own battery protocol virtually to cut evaluation time and cost by 70%

Drive Cycle
Track Nurburgring
Load Type
Power Profile
Initial SOC [%]
80
Initial Cell Temperature [°C]
40
Heat Transfer Coefficient [W/m²K]
50

Case Studies

See how we helped McMurtry reduce cell evaluation time by 70% through data driven testing and modelling.

Forbes.jpg
Motorsports

McMurtry Automotive: Faster cell evaluation

McMurtry Automotive used The Voltt and validated cell models to evaluate the transition from the Molicel P45B to P50B during early pack concept development.

 

Side by side modelling enabled rapid comparison of electrical and thermal behaviour, avoiding lengthy physical test campaigns. This approach reduced cell evaluation time by seven months, allowing the team to lock in cell selection and pack assumptions earlier while lowering technical risk and accelerating vehicle development.

 

Comparison with Related Cells

Compare the Reliance RU25 with similar Cylindrical 21700 cells offering comparable capacity and performance characteristics.

Model
Capacity
Max Discharge
Typical Use
Access Cell Data
EVE Energy 40PL
4.0 Ah
70.0 A
Aviation
Tenpower 40XG
4.0 Ah
90.0 A
Aviation
Ampace JP40
4.0 Ah
60.0 A
Aviation

Manufacturer Background

Reliance

Reliance is a Chinese manufacturer of high-power cylindrical lithium-ion cells

Reliance is a Chinese manufacturer of 21700 cylindrical lithium-ion cells built on a tabless electrode architecture, which lowers internal resistance and improves heat rejection under sustained load. Its RS and RP model codes denote the high-rate and high-capacity lines, and the trailing figure indicates the rated capacity. The cells are aimed at electric bicycles, light electric vehicles, karting and motorsport, power tools and other applications where continuous discharge sets the requirement. The company entered the market recently and competes with the established high-power cylindrical suppliers. Its range is extending to larger 46 mm diameter cylindrical formats.

Frequently Asked Questions

What is the capacity and voltage of the Reliance RU25?

The Reliance RU25 has a nominal capacity of 2.5 Ah and a nominal voltage of 3.6 V, providing 9 Wh of energy per cell.

What is the maximum continuous discharge capability of the Reliance RU25?

The Reliance RU25 supports continuous discharge rates up to 150 A.

How much does the Reliance RU25 weigh and what is its volume?

Physical dimensions are not specified for this cell.

In which industries is the Reliance RU25 commonly used?

The Reliance RU25 is used across aviation, motorsports, drones, applications that demand very high power output and thermal management under extreme discharge.

How does the Reliance RU25 compare with the EVE Energy 40PL?

Comparing the Reliance RU25 with the EVE Energy 40PL: capacity 2.5 Ah against 4 Ah; maximum continuous discharge 150 A against 70 A. Both datasheets can be compared side by side in The Voltt.

What chemistry and format is the Reliance RU25?

The Reliance RU25 is a cylindrical 21700 cell with a Ni-based cathode. It has a nominal voltage of 3.6 V. Its full datasheet is free to view in The Voltt.

Gavin 2025 (24).png

Explore Detailed Battery Models & Simulations

Access comprehensive performance data, compare cells side by-side, and run custom simulations in The Voltt platform

bottom of page