Cylindrical 21700 High-Power Cell
Ampace JP40
High-power cylindrical 21700 cell delivering 4 Ah capacity with 214 Wh/kg energy density and 60 A maximum discharge rate.
Overview
The Ampace JP40 is a high-power lithium-ion cylindrical 21700 cell designed for applications that demand sustained high current and high energy density. Manufactured in china, this cylindrical 21700 cell delivers 4 Ah capacity and 14.8 Wh of energy at a nominal voltage of 3.7 V, with a maximum continuous discharge capability of 60 A, making it well suited to high-power systems operating under aggressive load profiles.
Key Features
Extremely high discharge rate: 60 A continuous (15.0 C)
Charging rate: 2.0 C charging rate
Energy density: 214 Wh/kg
Power density: 3217 W/kg
Applications: aviation, motorsports, e-mobility
Technical Specifications from the Manufacturer
Parameter
Manufacturer
Ampace
Model
JP40
Type
Li-ion
Form factor
Cylindrical 21700
Country of origin
China
Release year
2024
Nominal voltage
3.7
Energy capacity [Wh]
14.8
Capacity [Ah]
4
Gravimetric energy density [Wh/kg]
214
Gravimetric power density [W/kg]
3217
Max continuous discharge [A]
60
Volume [cm³]
24.86
Mass [g]
69
Positive electrode (cathode)
Ni-based
Negative electrode (anode)
Graphite
Value
Applications & Use‑Cases
The Ampace JP40 is well suited to the following applications due to its cylindrical 21700 and high power performance.
Aviation: Requires high specific energy for extended flight duration, high power-to-weight ratio for climb performance, and reliable operation across wide temperature ranges at altitude.
Motorsports: Demands sustained high discharge under competitive load profiles, rapid transient response for acceleration, and thermal stability to maintain performance during race conditions.
E-Mobility: Requires balanced energy and power density for range and acceleration, high cycle life for daily use, and robust calendar life to ensure long-term reliability.
General Applications: Suitable for applications requiring reliable lithium-ion performance with proven cycle life, consistent capacity delivery, and operational safety across diverse use cases.
.jpg)
Performance & Model Data
Below are modelled performance metrics for the Ampace JP40 across key indicators, including constant current behaviour, rate capability, temperature dependence, and available power under representative drive cycle conditions.
Constant Current Voltage
Access Ampace JP40 constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not JP40 data.)
Constant Current Temperature
Access Ampace JP40 thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not JP40 data.)
Pulse Power Behaviour
Access Ampace JP40 pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not JP40 data.)
Dynamic Profile Response
Access Ampace JP40 mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not JP40 data.)
.png)
Case Studies
See how we helped McMurtry reduce cell evaluation time by 70% through data driven testing and modelling.
Motorsports
McMurtry Automotive: Faster cell evaluation
McMurtry Automotive used The Voltt and validated cell models to evaluate the transition from the Molicel P45B to P50B during early pack concept development.
Side by side modelling enabled rapid comparison of electrical and thermal behaviour, avoiding lengthy physical test campaigns. This approach reduced cell evaluation time by seven months, allowing the team to lock in cell selection and pack assumptions earlier while lowering technical risk and accelerating vehicle development.
Comparison with Related Cells
Compare the Ampace JP40 with similar Cylindrical 21700 cells offering comparable capacity and performance characteristics.
Model
Capacity
Max Discharge
Typical Use
Access Cell Data
Manufacturer Background
Ampace
Ampace is a Chinese high-power lithium-ion cell manufacturer
Ampace was established in 2021 in Xiamen as a joint venture between CATL and Amperex Technology Limited, combining automotive-scale manufacturing with consumer cell engineering. The company produces high-power cylindrical cells in the 18650 and 21700 formats, sold under its Jumbo Power series, alongside prismatic cells for residential and commercial energy storage. Its cells are used in electric two-wheelers and light electric vehicles, power tools, robotics, drones and home storage systems, where sustained discharge and fast charge acceptance set the design limit. Manufacturing is concentrated at a large purpose-built site in Xiamen. Ampace is one of the faster-growing suppliers of high-rate cylindrical cells outside the established power-cell manufacturers.
Frequently Asked Questions
What is the capacity and voltage of the Ampace JP40?
The Ampace JP40 has a nominal capacity of 4.0 Ah and a nominal voltage of 3.7 V, providing 14.8 Wh of energy per cell.
What is the maximum continuous discharge capability of the Ampace JP40?
The Ampace JP40 supports continuous discharge rates up to 60 A, delivering exceptional power density of 3,217 W/kg.
How much does the Ampace JP40 weigh and what is its volume?
The cell has a mass of 69 g and a volume of 24.86 cm³.
In which industries is the Ampace JP40 commonly used?
The Ampace JP40 is used across aviation, motorsports, drones, and power tools, applications that demand both high energy and power density.
What is The Voltt and how does it accelerate cell evaluation?
The Voltt holds 500+ verified commercial cell datasheets alongside validated simulation models built from cells characterised in About:Energy's own lab. Engineers screen candidates against their real duty cycle before buying hardware, which cut cell evaluation time by seven months for McMurtry Automotive and reduces evaluation cycles by up to 70%.
What data can be extracted using The Voltt?
Constant-current discharge curves at multiple C-rates, DC internal resistance against state of charge and temperature, pulse power maps, thermal response, and full mission-profile simulation with user-defined pack configurations. Models are available as equivalent circuit, thermal, physics-based and degradation formats, exportable for use in MATLAB, Simulink and Python workflows.
