top of page

Pouch High-Energy Cell

QuantumScape QSE-5

High-energy pouch cell delivering 5.6 Ah capacity with 301 Wh/kg energy density.

Overview

The QuantumScape QSE-5 is a lithium-ion pouch cell designed for applications that demand long runtime and competitive energy storage. Released in 2026 and with the manufacturer based in the United States, this pouch cell delivers 5.6 Ah capacity and 21.6 Wh of energy at a nominal voltage of 3.84 V, making it well suited to energy-focused applications requiring extended runtime.

Key Features

  • Energy density: 301 Wh/kg

  • Applications: aviation, e-mobility, energy storage

QuantumScape QSE-5 pouch lithium-ion battery cell, 5.6 Ah

Technical Specifications from the Manufacturer

Parameter
Manufacturer
QuantumScape
Model
QSE-5
Type
Li-ion
Form factor
Pouch
Country of origin
United States
Release year
2026
Nominal voltage
3.84
Energy capacity [Wh]
21.6
Capacity [Ah]
5.6
Gravimetric energy density [Wh/kg]
301
Gravimetric power density [W/kg]
​
Max continuous discharge [A]
​
Volume [cm³]
​
Mass [g]
71.8
Positive electrode (cathode)
​
Negative electrode (anode)
​
Value
Gavin 2025 - 2025-06-12T154701_edited.png

Explore and compare 550+ cells for free in our online database

Applications & Use‑Cases

The QuantumScape QSE-5 is well suited to the following applications due to its pouch form factor and high energy density performance.

  • Aviation: Requires high specific energy for extended flight duration, high power-to-weight ratio for climb performance, and reliable operation across wide temperature ranges at altitude.

  • E-Mobility: Requires balanced energy and power density for range and acceleration, high cycle life for daily use, and robust calendar life to ensure long-term reliability.

  • Energy Storage: Requires stable cycle life across deep discharge profiles, reliable calendar life under float conditions, and consistent capacity retention over extended deployment periods.

  • General Applications: Suitable for applications requiring reliable lithium-ion performance with proven cycle life, consistent capacity delivery, and operational safety across diverse use cases.

Performance & Model Data

Below are modelled performance metrics for the QuantumScape QSE-5 across key indicators, including constant current behaviour, rate capability, temperature dependence, and available power under representative drive cycle conditions.

Constant Current Voltage

Access QuantumScape QSE-5 constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not QSE-5 data.)

Access QuantumScape QSE-5 constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not QSE-5 data.)

Constant Current Temperature

Access QuantumScape QSE-5 thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not QSE-5 data.)

Access QuantumScape QSE-5 thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not QSE-5 data.)

Pulse Power Behaviour

Access QuantumScape QSE-5 pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not QSE-5 data.)

Access QuantumScape QSE-5 pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not QSE-5 data.)

Dynamic Profile Response

Access QuantumScape QSE-5 mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not QSE-5 data.)

Access QuantumScape QSE-5 mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not QSE-5 data.)

Gavin 2025 (25).png

Run your own battery protocol virtually to cut evaluation time and cost by 70%

Drive Cycle
Track Nurburgring
Load Type
Power Profile
Initial SOC [%]
80
Initial Cell Temperature [°C]
40
Heat Transfer Coefficient [W/m²K]
50

Case Studies

See how we helped McMurtry reduce cell evaluation time by 70% through data driven testing and modelling.

Forbes.jpg
Motorsports

McMurtry Automotive: Faster cell evaluation

McMurtry Automotive used The Voltt and validated cell models to evaluate the transition from the Molicel P45B to P50B during early pack concept development.

 

Side by side modelling enabled rapid comparison of electrical and thermal behaviour, avoiding lengthy physical test campaigns. This approach reduced cell evaluation time by seven months, allowing the team to lock in cell selection and pack assumptions earlier while lowering technical risk and accelerating vehicle development.

 

Comparison with Related Cells

Compare the QuantumScape QSE-5 with similar Pouch cells offering comparable capacity and performance characteristics.

Model
Capacity
Max Discharge
Typical Use
Access Cell Data
Amprius SA107
5.8 Ah
5.8 A
E-Mobility
Electric Power EP9543126VVP
6.8 Ah
102.0 A
Drones
SES H6AF
6.3 Ah
44.1 A
Aviation

Manufacturer Background

QuantumScape

QuantumScape is an American developer of lithium-metal cells with a ceramic separator

QuantumScape is a battery company headquartered in San Jose, California, and listed on the New York Stock Exchange. Its cells use a proprietary ceramic separator with an anode-free lithium-metal design, in which the lithium anode forms in place during the first charge. The company targets electric vehicles first, aiming for higher energy density and faster charging than graphite-anode lithium-ion cells. It works closely with PowerCo, the Volkswagen Group battery company, which holds a licence to produce cells based on its technology. QuantumScape began shipping B1 samples of the QSE-5 cell in 2025 and opened its Eagle Line for higher-volume pilot production in San Jose in 2026.

Frequently Asked Questions

What is the capacity and voltage of the QuantumScape QSE-5?

The QuantumScape QSE-5 has a nominal capacity of 5.6 Ah and a nominal voltage of 3.84 V, providing 21.6 Wh of energy per cell.

What is the energy density of the QuantumScape QSE-5?

The QuantumScape QSE-5 has a gravimetric energy density of 301 Wh/kg.

How much does the QuantumScape QSE-5 weigh and what is its volume?

The cell has a mass of 71.8 g.

In which industries is the QuantumScape QSE-5 commonly used?

The QuantumScape QSE-5 is used across aviation, e-mobility and energy storage, applications that demand high energy density and consistent performance over extended cycles.

How does the QuantumScape QSE-5 compare with the Amprius SA107?

Comparing the QuantumScape QSE-5 with the Amprius SA107: capacity 5.6 Ah against 5.8 Ah; energy density 301 Wh/kg against 449 Wh/kg; mass 71.8 g against 44.5 g. Both datasheets can be compared side by side in The Voltt.

What chemistry and format is the QuantumScape QSE-5?

The QuantumScape QSE-5 is a pouch cell. It has a nominal voltage of 3.84 V. Its full datasheet is free to view in The Voltt.

Gavin 2025 (24).png

Explore Detailed Battery Models & Simulations

Access comprehensive performance data, compare cells side by-side, and run custom simulations in The Voltt platform

bottom of page