Pouch High-Energy Cell
Amprius SA107
High-energy pouch cell delivering 5.66 Ah capacity with 432 Wh/kg energy density and 5.8 A maximum discharge rate.
Overview
The Amprius SA107 is a lithium-ion pouch cell designed for applications that demand high energy density and consistent capacity delivery. Released in 2025 and with the manufacturer based in the United States, this pouch cell delivers 5.66 Ah capacity and 19.2 Wh of energy at a nominal voltage of 3.4 V, with a maximum continuous discharge capability of 5.8 A, making it well suited to energy-focused applications requiring extended runtime. Among the pouch cells in the About:Energy battery library, the Amprius SA107 ranks 10th of 104 for gravimetric energy density. Its 432 Wh/kg compares with a pouch median of 341 Wh/kg.
Key Features
Discharge rate: 5.8 A continuous (1.0 C)
Energy density: 432 Wh/kg
Power density: 443 W/kg
Cathode: Ni-based
Applications: aviation, e-mobility, energy storage
Technical Specifications from the Manufacturer
Parameter
Manufacturer
Amprius
Model
SA107
Type
Li-ion
Form factor
Pouch
Country of origin
United States
Release year
2025
Nominal voltage
3.45
Energy capacity [Wh]
20
Capacity [Ah]
5.8
Gravimetric energy density [Wh/kg]
449
Gravimetric power density [W/kg]
450
Max continuous discharge [A]
5.8
Volume [cm³]
19.9742
Mass [g]
44.5
Positive electrode (cathode)
Ni-based
Negative electrode (anode)
Value
Applications & Use‑Cases
The Amprius SA107 is well suited to the following applications due to its pouch form factor and high energy density performance.
Aviation: Requires high specific energy for extended flight duration, high power-to-weight ratio for climb performance, and reliable operation across wide temperature ranges at altitude.
E-Mobility: Requires balanced energy and power density for range and acceleration, high cycle life for daily use, and robust calendar life to ensure long-term reliability.
Energy Storage: Requires stable cycle life across deep discharge profiles, reliable calendar life under float conditions, and consistent capacity retention over extended deployment periods.
General Applications: Suitable for applications requiring reliable lithium-ion performance with proven cycle life, consistent capacity delivery, and operational safety across diverse use cases.
.jpg)
Performance & Model Data
Below are modelled performance metrics for the Amprius SA107 across key indicators, including constant current behaviour, rate capability, temperature dependence, and available power under representative drive cycle conditions.
Constant Current Voltage
Access Amprius SA107 constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not SA107 data.)
Constant Current Temperature
Access Amprius SA107 thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not SA107 data.)
Pulse Power Behaviour
Access Amprius SA107 pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not SA107 data.)
Dynamic Profile Response
Access Amprius SA107 mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not SA107 data.)
.png)
Case Studies
See how we helped McMurtry reduce cell evaluation time by 70% through data driven testing and modelling.
Motorsports
McMurtry Automotive: Faster cell evaluation
McMurtry Automotive used The Voltt and validated cell models to evaluate the transition from the Molicel P45B to P50B during early pack concept development.
Side by side modelling enabled rapid comparison of electrical and thermal behaviour, avoiding lengthy physical test campaigns. This approach reduced cell evaluation time by seven months, allowing the team to lock in cell selection and pack assumptions earlier while lowering technical risk and accelerating vehicle development.
Comparison with Related Cells
Compare the Amprius SA107 with similar Pouch cells offering comparable capacity and performance characteristics.
Model
Capacity
Max Discharge
Typical Use
Access Cell Data
Manufacturer Background
Amprius
Amprius Technologies is an American silicon-anode lithium-ion cell manufacturer
Amprius Technologies was founded in 2008 and is based in Fremont, California, where it develops and manufactures lithium-ion pouch cells built on silicon anodes rather than graphite. Its SiMaxx platform uses a silicon nanowire anode and sits at the high-energy end of the commercial market, while the SiCore platform is designed for production at larger volumes through manufacturing partners. The cells serve uncrewed aerial systems, electric aviation, defence and other weight-limited platforms where every gram of pack mass reduces endurance or payload. The company is scaling output at a large facility in Brighton, Colorado. Its position rests on bringing silicon-anode chemistry into qualified, shipping products.
Frequently Asked Questions
What is the capacity and voltage of the Amprius SA107?
The Amprius SA107 has a nominal capacity of 5.66 Ah and a nominal voltage of 3.4 V, providing 19.2 Wh of energy per cell.
What is the maximum continuous discharge capability of the Amprius SA107?
The Amprius SA107 supports continuous discharge rates up to 5.8 A, delivering a power density of 443 W/kg.
How much does the Amprius SA107 weigh and what is its volume?
The cell has a mass of 44.5 g and a volume of 20 cm³.
In which industries is the Amprius SA107 commonly used?
The Amprius SA107 is used across aviation, e-mobility and energy storage, applications that demand high energy density and consistent performance over extended cycles.
How does the Amprius SA107 compare with the Amprius SA77?
Comparing the Amprius SA107 with the Amprius SA77: capacity 5.66 Ah against 5.66 Ah; maximum continuous discharge 5.8 A against 5.8 A; energy density 432 Wh/kg against 430 Wh/kg; mass 44.5 g against 45.5 g. Both datasheets can be compared side by side in The Voltt.
What chemistry and format is the Amprius SA107?
The Amprius SA107 is a pouch cell with a Ni-based cathode. It has a nominal voltage of 3.4 V and a volume of 20 cm³. Its full datasheet is free to view in The Voltt.
