top of page

Cylindrical 21700 High-Power Cell

Molicel P45B

High-power cylindrical 21700 cell delivering 4.5 Ah capacity with 231 Wh/kg energy density and 45 A maximum discharge rate.

Overview

The Molicel INR-21700-P45B is a high-power Li-ion cylindrical 21700 cell designed for applications that demand sustained high current and high energy density. Manufactured in taiwan, this cylindrical 21700 cell delivers 4.5 Ah capacity and 16.2 Wh of energy at a nominal voltage of 3.6 V, with a maximum continuous discharge capability of 45 A, making it well suited to high-power systems operating under aggressive load profiles. Its 45 A maximum continuous discharge is above the 21700 cylindrical median of 35 A in the About:Energy battery library.

Key Features

  • High discharge rate: 45 A continuous (10.0 C)

  • Energy density: 231 Wh/kg

  • Power density: 2,314 W/kg

  • Applications: aviation, motorsports, e-mobility

Molicel P45B 21700 cylindrical lithium-ion battery cell, 4.5 Ah, 45 A continuous

Technical Specifications from the Manufacturer

Parameter
Manufacturer
Molicel
Model
INR-21700-P45B
Type
Li-ion
Form factor
Cylindrical 21700
Country of origin
Taiwan
Release year
2022
Nominal voltage
3.6
Energy capacity [Wh]
16.2
Capacity [Ah]
4.5
Gravimetric energy density [Wh/kg]
231
Gravimetric power density [W/kg]
2314
Max continuous discharge [A]
45
Volume [cm³]
25.59
Mass [g]
70
Positive electrode (cathode)
Ni-based (high Ni)
Negative electrode (anode)
Graphite/Si additive
Value
Gavin 2025 - 2025-06-12T154701_edited.png

Explore and compare 550+ cells for free in our online database

Applications & Use‑Cases

The Molicel P45B is well suited to the following applications due to its cylindrical 21700 and high power performance.

  • Aviation: Requires high specific energy for extended flight duration, high power-to-weight ratio for climb performance, and reliable operation across wide temperature ranges at altitude.

  • Motorsports: Demands sustained high discharge under competitive load profiles, rapid transient response for acceleration, and thermal stability to maintain performance during race conditions.

  • E-Mobility: Requires balanced energy and power density for range and acceleration, high cycle life for daily use, and robust calendar life to ensure long-term reliability.

  • General Applications: Suitable for applications requiring reliable lithium-ion performance with proven cycle life, consistent capacity delivery, and operational safety across diverse use cases.

Performance & Model Data

Below are modelled performance metrics for the Molicel P45B across key indicators, including constant current behaviour, rate capability, temperature dependence, and available power under representative drive cycle conditions.

Constant Current Voltage

Access Molicel P45B constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not P45B data.)

Access Molicel P45B constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not P45B data.)

Constant Current Temperature

Access Molicel P45B thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not P45B data.)

Access Molicel P45B thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not P45B data.)

Pulse Power Behaviour

Access Molicel P45B pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not P45B data.)

Access Molicel P45B pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not P45B data.)

Dynamic Profile Response

Access Molicel P45B mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not P45B data.)

Access Molicel P45B mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not P45B data.)

Gavin 2025 (25).png

Run your own battery protocol virtually to cut evaluation time and cost by 70%

Drive Cycle
Track Nurburgring
Load Type
Power Profile
Initial SOC [%]
80
Initial Cell Temperature [°C]
40
Heat Transfer Coefficient [W/m²K]
50

Case Studies

See how we helped McMurtry reduce cell evaluation time by 70% through data driven testing and modelling.

Forbes.jpg
Motorsports

McMurtry Automotive: Faster cell evaluation

McMurtry Automotive used The Voltt and validated cell models to evaluate the transition from the Molicel P45B to P50B during early pack concept development.

 

Side by side modelling enabled rapid comparison of electrical and thermal behaviour, avoiding lengthy physical test campaigns. This approach reduced cell evaluation time by seven months, allowing the team to lock in cell selection and pack assumptions earlier while lowering technical risk and accelerating vehicle development.

 

Comparison with Related Cells

Compare the Molicel P45B with similar Cylindrical 21700 cells offering comparable capacity and performance characteristics.

Model
Capacity
Max Discharge
Typical Use
Access Cell Data
Amprius SA124
5.0 Ah
50.0 A
Aviation
EGI Battery 21700-4.5Ah
4.4 Ah
60.0 A
Aviation
Murata VTC6A
4.1 Ah
40.0 A
Aviation

Manufacturer Background

Molicel

Molicel is a Taiwanese manufacturer of high-power cylindrical lithium-ion cells

Molicel is the cell brand of E-One Moli Energy, a Taiwanese manufacturer whose technology traces back to lithium battery research begun in Canada in the 1970s. The company produces 18650 and 21700 cylindrical cells designed for high continuous discharge, fast charge acceptance and thermal stability under sustained load. Its P series power cells and higher-capacity variants are used in eVTOL aircraft, motorsport and performance vehicles, power tools and aerospace systems, where discharge rate sets the design limit. Manufacturing is in Taiwan, with research in Canada. In the P series model codes the figure gives the rated capacity, so the P45B is a 4.5 Ah cell.

Frequently Asked Questions

What is the capacity and voltage of the Molicel P45B?

The Molicel P45B has a nominal capacity of 4.5 Ah and a nominal voltage of 3.6 V, providing 16.2 Wh of energy per cell.

What is the maximum continuous discharge capability of the Molicel P45B?

The Molicel P45B supports continuous discharge rates up to 45 A, delivering exceptional power density of 2,314 W/kg.

How much does the Molicel P45B weigh and what is its volume?

The cell has a mass of 70 g and a volume of 25.6 cm³.

In which industries is the Molicel P45B commonly used?

The Molicel P45B is used across eVTOL, motorsports, drones, and e-mobility, applications that demand both high energy and power density.

How does the Molicel P45B compare with the Amprius SA124?

Comparing the Molicel P45B with the Amprius SA124: capacity 4.5 Ah against 5 Ah; maximum continuous discharge 45 A against 50 A; energy density 231 Wh/kg against 257 Wh/kg; mass 70 g against 70 g. Both datasheets can be compared side by side in The Voltt.

What chemistry and format is the Molicel P45B?

The Molicel P45B is a cylindrical 21700 cell with a Ni-based (high Ni) cathode and a Graphite/Si additive anode. It has a nominal voltage of 3.6 V and a volume of 25.6 cm³. Its full datasheet is free to view in The Voltt.

Gavin 2025 (24).png

Explore Detailed Battery Models & Simulations

Access comprehensive performance data, compare cells side by-side, and run custom simulations in The Voltt platform

bottom of page