top of page

Cylindrical 21700 High-Power Cell

Murata VTC6A

High-power cylindrical 21700 cell delivering 4.1 Ah capacity with 199 Wh/kg energy density and 40 A maximum discharge rate.

Overview

The Murata US21700VTC6A is a high-power lithium-ion cylindrical 21700 cell designed for applications that demand sustained high current and high energy density. Released in 2018 and with the manufacturer based in Singapore, this cylindrical 21700 cell delivers 4.1 Ah capacity and 14.4 Wh of energy at a nominal voltage of 3.6 V, with a maximum continuous discharge capability of 40 A, making it well suited to high-power systems operating under aggressive load profiles. Its 40 A maximum continuous discharge is above the 21700 cylindrical median of 35 A in the About:Energy battery library.

Key Features

  • High discharge rate: 40 A continuous (9.8 C)

  • Energy density: 199 Wh/kg

  • Power density: 1,981 W/kg

  • Cathode: Ni-based

  • Applications: aviation, motorsports, e-mobility

Murata VTC6A 21700 cylindrical lithium-ion battery cell, 4.1 Ah, 40 A continuous

Technical Specifications from the Manufacturer

Parameter
Manufacturer
Murata
Model
US21700VTC6A
Type
Li-ion
Form factor
Cylindrical 21700
Country of origin
Singapore
Release year
2018
Nominal voltage
3.6
Energy capacity [Wh]
14.44
Capacity [Ah]
4.1
Gravimetric energy density [Wh/kg]
199
Gravimetric power density [W/kg]
1981
Max continuous discharge [A]
40
Volume [cm³]
24.99
Mass [g]
72.7
Positive electrode (cathode)
Ni-based
Negative electrode (anode)
Graphite/Si additive
Value
Gavin 2025 - 2025-06-12T154701_edited.png

Explore and compare 550+ cells for free in our online database

Applications & Use‑Cases

The Murata VTC6A is well suited to the following applications due to its cylindrical 21700 form factor and high power performance.

  • Aviation: Requires high specific energy for extended flight duration, high power-to-weight ratio for climb performance, and reliable operation across wide temperature ranges at altitude.

  • Motorsports: Demands sustained high discharge under competitive load profiles, rapid transient response for acceleration, and thermal stability to maintain performance during race conditions.

  • E-Mobility: Requires balanced energy and power density for range and acceleration, high cycle life for daily use, and robust calendar life to ensure long-term reliability.

  • General Applications: Suitable for applications requiring reliable lithium-ion performance with proven cycle life, consistent capacity delivery, and operational safety across diverse use cases.

Performance & Model Data

Below are modelled performance metrics for the Murata VTC6A across key indicators, including constant current behaviour, rate capability, temperature dependence, and available power under representative drive cycle conditions.

Constant Current Voltage

Access Murata VTC6A constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not VTC6A data.)

Access Murata VTC6A constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not VTC6A data.)

Constant Current Temperature

Access Murata VTC6A thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not VTC6A data.)

Access Murata VTC6A thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not VTC6A data.)

Pulse Power Behaviour

Access Murata VTC6A pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not VTC6A data.)

Access Murata VTC6A pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not VTC6A data.)

Dynamic Profile Response

Access Murata VTC6A mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not VTC6A data.)

Access Murata VTC6A mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not VTC6A data.)

Gavin 2025 (25).png

Run your own battery protocol virtually to cut evaluation time and cost by 70%

Drive Cycle
Track Nurburgring
Load Type
Power Profile
Initial SOC [%]
80
Initial Cell Temperature [°C]
40
Heat Transfer Coefficient [W/m²K]
50

Case Studies

See how we helped McMurtry reduce cell evaluation time by 70% through data driven testing and modelling.

Forbes.jpg
Motorsports

McMurtry Automotive: Faster cell evaluation

McMurtry Automotive used The Voltt and validated cell models to evaluate the transition from the Molicel P45B to P50B during early pack concept development.

 

Side by side modelling enabled rapid comparison of electrical and thermal behaviour, avoiding lengthy physical test campaigns. This approach reduced cell evaluation time by seven months, allowing the team to lock in cell selection and pack assumptions earlier while lowering technical risk and accelerating vehicle development.

 

Comparison with Related Cells

Compare the Murata VTC6A with similar Cylindrical 21700 cells offering comparable capacity and performance characteristics.

Model
Capacity
Max Discharge
Typical Use
Access Cell Data
Molicel XA3
4.0 Ah
360.0 A
Aviation
Samsung 40T3
4.0 Ah
50.0 A
Aviation
Samsung 40W
4.0 Ah
60.0 A
Aviation

Manufacturer Background

Murata

Murata is a Japanese manufacturer of cylindrical lithium-ion cells for power tools and mobility

Murata Manufacturing is a Japanese electronic components group headquartered in Kyoto. It entered lithium-ion cell manufacturing in 2017 by acquiring Sony's battery business, including the US-series cylindrical cells and the VTC family. VTC cells are widely used in power tools and electric two-wheelers for their high continuous discharge. Murata produces 18650 and 21700 cells at plants in Japan, Singapore and China, and its model codes carry the US prefix followed by the cell diameter and length. The range covers high-power VTC cells and higher-capacity variants for energy-led applications.

Frequently Asked Questions

What is the capacity and voltage of the Murata VTC6A?

The Murata VTC6A has a nominal capacity of 4.1 Ah and a nominal voltage of 3.6 V, providing 14.4 Wh of energy per cell.

What is the maximum continuous discharge capability of the Murata VTC6A?

The Murata VTC6A supports continuous discharge rates up to 40 A, delivering exceptional power density of 1,981 W/kg.

How much does the Murata VTC6A weigh and what is its volume?

The cell has a mass of 72.7 g and a volume of 25 cm³.

In which industries is the Murata VTC6A commonly used?

The Murata VTC6A is used across eVTOL, motorsports, drones, and e-mobility, applications that demand both high energy and power density.

How does the Murata VTC6A compare with the Molicel XA3?

Comparing the Murata VTC6A with the Molicel XA3: capacity 4.1 Ah against 4 Ah; maximum continuous discharge 40 A against 360 A. Both datasheets can be compared side by side in The Voltt.

What chemistry and format is the Murata VTC6A?

The Murata VTC6A is a cylindrical 21700 cell with a Ni-based cathode and a Graphite/Si additive anode. It has a nominal voltage of 3.6 V and a volume of 25 cm³. Its full datasheet is free to view in The Voltt.

Gavin 2025 (24).png

Explore Detailed Battery Models & Simulations

Access comprehensive performance data, compare cells side by-side, and run custom simulations in The Voltt platform

bottom of page