top of page

Pouch Cell

Welion SHP320-35

Pouch cell delivering 35 Ah capacity with 308 Wh/kg energy density and 175 A maximum discharge rate.

Overview

The Welion SHP320-35 is a lithium-ion pouch cell designed for applications that demand reliable performance across a broad range of load conditions. Released in 2023 and with the manufacturer based in China, this pouch cell delivers 35 Ah capacity and 128 Wh of energy at a nominal voltage of 3.65 V, with a maximum continuous discharge capability of 175 A, making it suitable for applications that balance runtime against peak power demand. Among the pouch cells in the About:Energy battery library, the Welion SHP320-35 ranks 8th of 98 for maximum continuous discharge. Its 175 A compares with a pouch median of 75 A.

Key Features

  • Discharge rate: 175 A continuous (5.0 C)

  • Energy density: 308 Wh/kg

  • Power density: 1,539 W/kg

  • Cathode: Ni-based

  • Applications: drones, aviation, e-mobility

Welion SHP320-35 pouch lithium-ion battery cell, 35 Ah, 175 A continuous

Technical Specifications from the Manufacturer

Parameter
Manufacturer
Welion
Model
SHP320-35
Type
Li-ion
Form factor
Pouch
Country of origin
China
Release year
2023
Nominal voltage
3.65
Energy capacity [Wh]
127.75
Capacity [Ah]
35
Gravimetric energy density [Wh/kg]
308
Gravimetric power density [W/kg]
1539
Max continuous discharge [A]
175
Volume [cm³]
190.08
Mass [g]
415
Positive electrode (cathode)
Ni-based
Negative electrode (anode)
​
Value
Gavin 2025 - 2025-06-12T154701_edited.png

Explore and compare 550+ cells for free in our online database

Applications & Use‑Cases

The Welion SHP320-35 is well suited to the following applications due to its pouch form factor and balanced performance.

  • Drones: Demands high gravimetric power density for thrust and payload capacity, rapid current response for flight control, and stable voltage delivery across dynamic flight profiles.

  • Aviation: Requires high specific energy for extended flight duration, high power-to-weight ratio for climb performance, and reliable operation across wide temperature ranges at altitude.

  • E-Mobility: Requires balanced energy and power density for range and acceleration, high cycle life for daily use, and robust calendar life to ensure long-term reliability.

  • General Applications: Suitable for applications requiring reliable lithium-ion performance with proven cycle life, consistent capacity delivery, and operational safety across diverse use cases.

Performance & Model Data

Below are modelled performance metrics for the Welion SHP320-35 across key indicators, including constant current behaviour, rate capability, temperature dependence, and available power under representative drive cycle conditions.

Constant Current Voltage

Access Welion SHP320-35 constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not SHP320-35 data.)

Access Welion SHP320-35 constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not SHP320-35 data.)

Constant Current Temperature

Access Welion SHP320-35 thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not SHP320-35 data.)

Access Welion SHP320-35 thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not SHP320-35 data.)

Pulse Power Behaviour

Access Welion SHP320-35 pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not SHP320-35 data.)

Access Welion SHP320-35 pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not SHP320-35 data.)

Dynamic Profile Response

Access Welion SHP320-35 mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not SHP320-35 data.)

Access Welion SHP320-35 mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not SHP320-35 data.)

Gavin 2025 (25).png

Run your own battery protocol virtually to cut evaluation time and cost by 70%

Drive Cycle
Track Nurburgring
Load Type
Power Profile
Initial SOC [%]
80
Initial Cell Temperature [°C]
40
Heat Transfer Coefficient [W/m²K]
50

Case Studies

See how we helped McMurtry reduce cell evaluation time by 70% through data driven testing and modelling.

Forbes.jpg
Motorsports

McMurtry Automotive: Faster cell evaluation

McMurtry Automotive used The Voltt and validated cell models to evaluate the transition from the Molicel P45B to P50B during early pack concept development.

 

Side by side modelling enabled rapid comparison of electrical and thermal behaviour, avoiding lengthy physical test campaigns. This approach reduced cell evaluation time by seven months, allowing the team to lock in cell selection and pack assumptions earlier while lowering technical risk and accelerating vehicle development.

 

Comparison with Related Cells

Compare the Welion SHP320-35 with similar Pouch cells offering comparable capacity and performance characteristics.

Model
Capacity
Max Discharge
Typical Use
Access Cell Data
Amprius SA134
34.7 Ah
139.0 A
Aviation
Enpower Greentech XNP0350J
35.0 Ah
105.0 A
Aviation
Advantelec 3S300-35
35.0 Ah
105.0 A
Aviation

Manufacturer Background

Welion

WeLion is a Chinese developer of semi-solid-state lithium-ion cells

Beijing WeLion New Energy Technology was founded in 2016 as a spin-out from the Institute of Physics at the Chinese Academy of Sciences, and develops lithium-ion cells using hybrid solid-liquid electrolytes. The company supplies semi-solid-state cells for high-capacity passenger vehicle packs and produces high-power pouch cells for drones, eVTOL aircraft and other uncrewed platforms. Its SHP model codes denote high-power variants, with the trailing figure indicating rated capacity, while ESS-suffixed cells target stationary storage. WeLion operates production in Beijing and Zhejiang and is scaling toward all-solid-state chemistry. Its relevance lies in being one of the few manufacturers shipping semi-solid-state cells in commercial volumes.

Frequently Asked Questions

What is the capacity and voltage of the Welion SHP320-35?

The Welion SHP320-35 has a nominal capacity of 35 Ah and a nominal voltage of 3.65 V, providing 128 Wh of energy per cell.

What is the maximum continuous discharge capability of the Welion SHP320-35?

The Welion SHP320-35 supports continuous discharge rates up to 175 A, delivering a power density of 1,539 W/kg.

How much does the Welion SHP320-35 weigh and what is its volume?

The cell has a mass of 415 g and a volume of 190 cm³.

In which industries is the Welion SHP320-35 commonly used?

The Welion SHP320-35 is used across drones, aviation and e-mobility, applications that demand reliable performance and balanced energy and power.

How does the Welion SHP320-35 compare with the Amprius SA134?

Comparing the Welion SHP320-35 with the Amprius SA134: capacity 35 Ah against 34.7 Ah; maximum continuous discharge 175 A against 139 A; energy density 308 Wh/kg against 320 Wh/kg; mass 415 g against 378 g. Both datasheets can be compared side by side in The Voltt.

What chemistry and format is the Welion SHP320-35?

The Welion SHP320-35 is a pouch cell with a Ni-based cathode. It has a nominal voltage of 3.65 V and a volume of 190 cm³. Its full datasheet is free to view in The Voltt.

Gavin 2025 (24).png

Explore Detailed Battery Models & Simulations

Access comprehensive performance data, compare cells side by-side, and run custom simulations in The Voltt platform

bottom of page