top of page

Cylindrical 21700 High-Power Cell

TerraE 50P

High-power cylindrical 21700 cell delivering 5 Ah capacity with 240 Wh/kg energy density and 50 A maximum discharge rate.

Overview

The TerraE INR21700-50P is a high-power lithium-ion cylindrical 21700 cell designed for applications that demand sustained high current and high energy density. Released in 2023 and with the manufacturer based in Germany, this cylindrical 21700 cell delivers 5 Ah capacity and 18 Wh of energy at a nominal voltage of 3.6 V, with a maximum continuous discharge capability of 50 A, making it well suited to high-power systems operating under aggressive load profiles. Its 50 A maximum continuous discharge is above the 21700 cylindrical median of 35 A in the About:Energy battery library.

Key Features

  • High discharge rate: 50 A continuous (10.0 C)

  • Energy density: 240 Wh/kg

  • Power density: 2,400 W/kg

  • Cathode: Ni-based

  • Applications: aviation, motorsports, e-mobility

TerraE 50P 21700 cylindrical lithium-ion battery cell, 5 Ah, 50 A continuous

Technical Specifications from the Manufacturer

Parameter
Manufacturer
TerraE
Model
INR21700-50P
Type
Li-ion
Form factor
Cylindrical 21700
Country of origin
Germany
Release year
2023
Nominal voltage
3.6
Energy capacity [Wh]
18
Capacity [Ah]
5
Gravimetric energy density [Wh/kg]
240
Gravimetric power density [W/kg]
2400
Max continuous discharge [A]
50
Volume [cm³]
26.24
Mass [g]
75
Positive electrode (cathode)
Ni-based
Negative electrode (anode)
​
Value
Gavin 2025 - 2025-06-12T154701_edited.png

Explore and compare 550+ cells for free in our online database

Applications & Use‑Cases

The TerraE 50P is well suited to the following applications due to its cylindrical 21700 and high power performance.

  • Aviation: Requires high specific energy for extended flight duration, high power-to-weight ratio for climb performance, and reliable operation across wide temperature ranges at altitude.

  • Motorsports: Demands sustained high discharge under competitive load profiles, rapid transient response for acceleration, and thermal stability to maintain performance during race conditions.

  • E-Mobility: Requires balanced energy and power density for range and acceleration, high cycle life for daily use, and robust calendar life to ensure long-term reliability.

  • General Applications: Suitable for applications requiring reliable lithium-ion performance with proven cycle life, consistent capacity delivery, and operational safety across diverse use cases.

Performance & Model Data

Below are modelled performance metrics for the TerraE 50P across key indicators, including constant current behaviour, rate capability, temperature dependence, and available power under representative drive cycle conditions.

Constant Current Voltage

Access TerraE 50P constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not 50P data.)

Access TerraE 50P constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not 50P data.)

Constant Current Temperature

Access TerraE 50P thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not 50P data.)

Access TerraE 50P thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not 50P data.)

Pulse Power Behaviour

Access TerraE 50P pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not 50P data.)

Access TerraE 50P pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not 50P data.)

Dynamic Profile Response

Access TerraE 50P mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not 50P data.)

Access TerraE 50P mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not 50P data.)

Gavin 2025 (25).png

Run your own battery protocol virtually to cut evaluation time and cost by 70%

Drive Cycle
Track Nurburgring
Load Type
Power Profile
Initial SOC [%]
80
Initial Cell Temperature [°C]
40
Heat Transfer Coefficient [W/m²K]
50

Case Studies

See how we helped McMurtry reduce cell evaluation time by 70% through data driven testing and modelling.

Forbes.jpg
Motorsports

McMurtry Automotive: Faster cell evaluation

McMurtry Automotive used The Voltt and validated cell models to evaluate the transition from the Molicel P45B to P50B during early pack concept development.

 

Side by side modelling enabled rapid comparison of electrical and thermal behaviour, avoiding lengthy physical test campaigns. This approach reduced cell evaluation time by seven months, allowing the team to lock in cell selection and pack assumptions earlier while lowering technical risk and accelerating vehicle development.

 

Comparison with Related Cells

Compare the TerraE 50P with similar Cylindrical 21700 cells offering comparable capacity and performance characteristics.

Model
Capacity
Max Discharge
Typical Use
Access Cell Data
LG Chem H51
5.0 Ah
25.0 A
Aviation
Tenpower 50XG
5.0 Ah
90.0 A
Aviation
EVE Energy 50PL
5.0 Ah
80.0 A
Aviation

Manufacturer Background

TerraE

TerraE is a German brand of cylindrical lithium-ion cells owned by BMZ Group

TerraE is a cylindrical cell brand of the BMZ Group, a German battery system maker based in Karlstein am Main. It began as a Frankfurt start-up planning large-scale cell production in Germany, and BMZ acquired TerraE Holding at the end of 2018. Since then, TerraE cells have been specified by BMZ and produced on existing lines of Asian partner manufacturers. The range covers 18650 and 21700 lithium-ion cells in energy and power variants, and the company has also announced sodium-ion cells under the NaTe name. TerraE cells are supplied to battery pack builders for e-bikes, power tools, industrial equipment and energy storage.

Frequently Asked Questions

What is the capacity and voltage of the TerraE 50P?

The TerraE 50P has a nominal capacity of 5 Ah and a nominal voltage of 3.6 V, providing 18 Wh of energy per cell.

What is the maximum continuous discharge capability of the TerraE 50P?

The TerraE 50P supports continuous discharge rates up to 50 A, delivering exceptional power density of 2,400 W/kg.

How much does the TerraE 50P weigh and what is its volume?

The cell has a mass of 75 g and a volume of 26.2 cm³.

In which industries is the TerraE 50P commonly used?

The TerraE 50P is used across eVTOL, motorsports, drones, and e-mobility, applications that demand both high energy and power density.

How does the TerraE 50P compare with the LG Chem H51?

Comparing the TerraE 50P with the LG Chem H51: capacity 5 Ah against 5 Ah; maximum continuous discharge 50 A against 25 A; energy density 240 Wh/kg against 258 Wh/kg; mass 75 g against 70.5 g. Both datasheets can be compared side by side in The Voltt.

What chemistry and format is the TerraE 50P?

The TerraE 50P is a cylindrical 21700 cell with a Ni-based cathode. It has a nominal voltage of 3.6 V and a volume of 26.2 cm³. Its full datasheet is free to view in The Voltt.

Gavin 2025 (24).png

Explore Detailed Battery Models & Simulations

Access comprehensive performance data, compare cells side by-side, and run custom simulations in The Voltt platform

bottom of page