Cylindrical 18650 High-Power Cell
Tenpower 25PG
Cylindrical 18650 cell delivering 2.5 Ah capacity with 200 Wh/kg energy density and 20 A maximum discharge rate.
Overview
The Tenpower 25PG is a high-power lithium-ion cylindrical 18650 cell designed for applications that demand reliable performance and consistent capacity delivery. Released in 2022 and with the manufacturer based in Malaysia, this cylindrical 18650 cell delivers 2.5 Ah capacity and 9.0 Wh of energy at a nominal voltage of 3.6 V, with a maximum continuous discharge capability of 20 A, making it well suited to high-power systems requiring sustained current delivery. Its silicon-additive graphite anode contributes to a gravimetric energy density of 200 Wh/kg, above the median for 18650 cells in the Voltt library.
Key Features
High discharge rate: 20 A continuous (8.0 C)
Charging rate: 2.0 C charging rate
Energy density: 200 Wh/kg
Power density: 1600 W/kg
Applications: aviation, motorsports, drones
Technical Specifications from the Manufacturer
Parameter
Manufacturer
Tenpower
Model
INR18650-25PG
Type
Li-ion
Form factor
Cylindrical 18650
Country of origin
Malaysia
Release year
2022
Nominal voltage
3.6
Energy capacity [Wh]
9
Capacity [Ah]
2.5
Gravimetric energy density [Wh/kg]
200
Gravimetric power density [W/kg]
1600
Max continuous discharge [A]
20
Volume [cm³]
17.74
Mass [g]
45
Positive electrode (cathode)
Ni-based
Negative electrode (anode)
Graphite/Si additive
Value
Applications & Use‑Cases
The Tenpower 25PG is well suited to the following applications due to its cylindrical 18650 form factor and high power performance.
Aviation: Requires high specific energy for extended flight duration, high power-to-weight ratio for climb performance, and reliable operation across wide temperature ranges at altitude.
Motorsports: Demands sustained high discharge under competitive load profiles, rapid transient response for acceleration, and thermal stability to maintain performance during race conditions.
Drones: Demands high gravimetric power density for thrust and payload capacity, rapid current response for flight control, and stable voltage delivery across dynamic flight profiles.
General Applications: Suitable for applications requiring reliable lithium-ion performance with proven cycle life, consistent capacity delivery, and operational safety across diverse use cases.
.jpg)
Performance & Model Data
Below are modelled performance metrics for the Tenpower 25PG across key indicators, including constant current behaviour, rate capability, temperature dependence, and available power under representative drive cycle conditions.
Constant Current Voltage
Access Tenpower 25PG constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not 25PG data.)
Constant Current Temperature
Access Tenpower 25PG thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not 25PG data.)
Pulse Power Behaviour
Access Tenpower 25PG pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not 25PG data.)
Dynamic Profile Response
Access Tenpower 25PG mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not 25PG data.)
.png)
Case Studies
See how we helped McMurtry reduce cell evaluation time by 70% through data driven testing and modelling.
Motorsports
McMurtry Automotive: Faster cell evaluation
McMurtry Automotive used The Voltt and validated cell models to evaluate the transition from the Molicel P45B to P50B during early pack concept development.
Side by side modelling enabled rapid comparison of electrical and thermal behaviour, avoiding lengthy physical test campaigns. This approach reduced cell evaluation time by seven months, allowing the team to lock in cell selection and pack assumptions earlier while lowering technical risk and accelerating vehicle development.
Comparison with Related Cells
Compare the Tenpower 25PG with similar Cylindrical 18650 cells offering comparable capacity and performance characteristics.
Model
Capacity
Max Discharge
Typical Use
Access Cell Data
Manufacturer Background
Tenpower
Tenpower is a Chinese cylindrical lithium-ion cell manufacturer
Jiangsu Tenpower Lithium was founded in 2006 and is based in Zhangjiagang, China, where it develops and manufactures cylindrical lithium-ion cells in the 18650 and 21700 formats. Its catalogue covers both lithium iron phosphate and nickel-based chemistries, tuned for high power delivery, thermal stability and fast charging. The company supplies power tools, electric two-wheelers and light mobility, vacuum cleaners and energy storage customers across more than forty countries, having shipped cells in the billions since founding. It is a subsidiary of a listed Chinese industrial group, which underwrites its manufacturing capacity. Tenpower is an established high-volume supplier in the cylindrical power-cell segment rather than a recent entrant.
Frequently Asked Questions
What is the capacity and voltage of the Tenpower 25PG?
The Tenpower 25PG has a nominal capacity of 2.5 Ah and a nominal voltage of 3.6 V, providing 9.0 Wh of energy per cell.
What is the maximum continuous discharge capability of the Tenpower 25PG?
The Tenpower 25PG supports continuous discharge rates up to 20 A, delivering a power density of 1600 W/kg.
How much does the Tenpower 25PG weigh and what is its volume?
The cell has a mass of 45 g and a volume of 17.74 cm³.
In which industries is the Tenpower 25PG commonly used?
The Tenpower 25PG is used across aviation, motorsports, drones, applications that demand very high power output and thermal management under extreme discharge.
What is The Voltt and how does it accelerate cell evaluation?
The Voltt holds 500+ verified commercial cell datasheets alongside validated simulation models built from cells characterised in About:Energy's own lab. Engineers screen candidates against their real duty cycle before buying hardware, which cut cell evaluation time by seven months for McMurtry Automotive and reduces evaluation cycles by up to 70%.
What data can be extracted using The Voltt?
Constant-current discharge curves at multiple C-rates, DC internal resistance against state of charge and temperature, pulse power maps, thermal response, and full mission-profile simulation with user-defined pack configurations. Models are available as equivalent circuit, thermal, physics-based and degradation formats, exportable for use in MATLAB, Simulink and Python workflows.
