top of page

Cylindrical 21700 High-Power Cell

Samsung 40T3

Cylindrical 21700 cell delivering 4 Ah capacity with 206 Wh/kg energy density and 50 A maximum discharge rate.

Overview

The Samsung 40T3 is a high-power lithium-ion cylindrical 21700 cell designed for applications that demand very high continuous discharge rates. Released in 2020 and with the manufacturer based in South Korea, this cylindrical 21700 cell delivers 4 Ah capacity and 14.4 Wh of energy at a nominal voltage of 3.6 V, with a maximum continuous discharge capability of 50 A, making it well suited to high-power systems operating under aggressive discharge profiles. Its 50 A maximum continuous discharge is above the 21700 cylindrical median of 35 A in the About:Energy battery library.

Key Features

  • Extremely high discharge rate: 50 A continuous (12.5 C)

  • Energy density: 206 Wh/kg

  • Power density: 2,571 W/kg

  • Applications: aviation, motorsports, drones

Samsung 40T3 21700 cylindrical lithium-ion battery cell, 4 Ah, 50 A continuous

Technical Specifications from the Manufacturer

Parameter
Manufacturer
Samsung
Model
40T3
Type
Li-ion
Form factor
Cylindrical 21700
Country of origin
South Korea
Release year
2020
Nominal voltage
3.6
Energy capacity [Wh]
14.4
Capacity [Ah]
4
Gravimetric energy density [Wh/kg]
206
Gravimetric power density [W/kg]
2571
Max continuous discharge [A]
50
Volume [cm³]
24.86
Mass [g]
70
Positive electrode (cathode)
Ni-based
Negative electrode (anode)
Graphite/Si additive
Value
Gavin 2025 - 2025-06-12T154701_edited.png

Explore and compare 550+ cells for free in our online database

Applications & Use‑Cases

The Samsung 40T3 is well suited to the following applications due to its cylindrical 21700 form factor and high power performance.

  • Aviation: Requires high specific energy for extended flight duration, high power-to-weight ratio for climb performance, and reliable operation across wide temperature ranges at altitude.

  • Motorsports: Demands sustained high discharge under competitive load profiles, rapid transient response for acceleration, and thermal stability to maintain performance during race conditions.

  • Drones: Demands high gravimetric power density for thrust and payload capacity, rapid current response for flight control, and stable voltage delivery across dynamic flight profiles.

  • General Applications: Suitable for applications requiring reliable lithium-ion performance with proven cycle life, consistent capacity delivery, and operational safety across diverse use cases.

Performance & Model Data

Below are modelled performance metrics for the Samsung 40T3 across key indicators, including constant current behaviour, rate capability, temperature dependence, and available power under representative drive cycle conditions.

Constant Current Voltage

Access Samsung 40T3 constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not 40T3 data.)

Access Samsung 40T3 constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not 40T3 data.)

Constant Current Temperature

Access Samsung 40T3 thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not 40T3 data.)

Access Samsung 40T3 thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not 40T3 data.)

Pulse Power Behaviour

Access Samsung 40T3 pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not 40T3 data.)

Access Samsung 40T3 pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not 40T3 data.)

Dynamic Profile Response

Access Samsung 40T3 mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not 40T3 data.)

Access Samsung 40T3 mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not 40T3 data.)

Gavin 2025 (25).png

Run your own battery protocol virtually to cut evaluation time and cost by 70%

Drive Cycle
Track Nurburgring
Load Type
Power Profile
Initial SOC [%]
80
Initial Cell Temperature [°C]
40
Heat Transfer Coefficient [W/m²K]
50

Case Studies

See how we helped McMurtry reduce cell evaluation time by 70% through data driven testing and modelling.

Forbes.jpg
Motorsports

McMurtry Automotive: Faster cell evaluation

McMurtry Automotive used The Voltt and validated cell models to evaluate the transition from the Molicel P45B to P50B during early pack concept development.

 

Side by side modelling enabled rapid comparison of electrical and thermal behaviour, avoiding lengthy physical test campaigns. This approach reduced cell evaluation time by seven months, allowing the team to lock in cell selection and pack assumptions earlier while lowering technical risk and accelerating vehicle development.

 

Comparison with Related Cells

Compare the Samsung 40T3 with similar Cylindrical 21700 cells offering comparable capacity and performance characteristics.

Model
Capacity
Max Discharge
Typical Use
Access Cell Data
EVE Energy 40P
4.0 Ah
50.0 A
Aviation
Tenpower 40XG
4.0 Ah
90.0 A
Aviation
Murata VX40
4.1 Ah
50.0 A
Aviation

Manufacturer Background

Samsung SDI

Samsung SDI is a South Korean manufacturer of cylindrical, prismatic and pouch lithium-ion cells

Samsung SDI is headquartered in Yongin, South Korea, and manufactures lithium-ion cells in cylindrical, prismatic and pouch formats. Its 18650 and 21700 cylindrical cells come in energy-led and high-power variants with high-nickel NCA and NCM cathodes. They are used in power tools, electric two-wheelers, vacuum cleaners and vehicle packs. The model codes denote capacity class and rate capability, so the 50S is a 5 Ah high-rate 21700 cell. Manufacturing covers South Korea, China, Hungary and the United States, including joint ventures with automotive partners.

Frequently Asked Questions

What is the capacity and voltage of the Samsung 40T3?

The Samsung 40T3 has a nominal capacity of 4 Ah and a nominal voltage of 3.6 V, providing 14.4 Wh of energy per cell.

What is the maximum continuous discharge capability of the Samsung 40T3?

The Samsung 40T3 supports continuous discharge rates up to 50 A, delivering a power density of 2,571 W/kg.

How much does the Samsung 40T3 weigh and what is its volume?

The cell has a mass of 70 g and a volume of 24.9 cm³.

In which industries is the Samsung 40T3 commonly used?

The Samsung 40T3 is used across aviation, motorsports, drones, applications that demand very high power output and thermal management under extreme discharge.

How does the Samsung 40T3 compare with the EVE Energy 40P?

Comparing the Samsung 40T3 with the EVE Energy 40P: capacity 4 Ah against 4 Ah; maximum continuous discharge 50 A against 50 A; energy density 206 Wh/kg against 206 Wh/kg; mass 70 g against 70 g. Both datasheets can be compared side by side in The Voltt.

What chemistry and format is the Samsung 40T3?

The Samsung 40T3 is a cylindrical 21700 cell with a Ni-based cathode and a Graphite/Si additive anode. It has a nominal voltage of 3.6 V and a volume of 24.9 cm³. Its full datasheet is free to view in The Voltt.

Gavin 2025 (24).png

Explore Detailed Battery Models & Simulations

Access comprehensive performance data, compare cells side by-side, and run custom simulations in The Voltt platform

bottom of page