top of page

Cylindrical 21700 High-Power Cell

Molicel XA1

Cylindrical 21700 cell delivering 2.6 Ah capacity and 260 A maximum discharge rate.

Overview

The Molicel XA1 is a high-power lithium-ion cylindrical 21700 cell designed for applications that demand very high continuous discharge rates. Released in 2026 and with the manufacturer based in Taiwan, this cylindrical 21700 cell delivers 2.6 Ah capacity and 9.36 Wh of energy, with a maximum continuous discharge capability of 260 A, making it well suited to high-power systems operating under aggressive discharge profiles. With a continuous discharge rate of 100 C, the XA1 is among the highest-rated cells for peak power delivery in the Voltt library.

Key Features

  • Extremely high discharge rate: 260 A continuous (100.0 C)

  • Applications: aviation, motorsports, drones

Molicel XA1 21700 cylindrical lithium-ion battery cell, 2.6 Ah, 260 A continuous

Technical Specifications from the Manufacturer

Parameter
Manufacturer
Molicel
Model
XA1
Type
Li-ion
Form factor
Cylindrical 21700
Country of origin
Taiwan
Release year
2026
Nominal voltage
​
Energy capacity [Wh]
9.36
Capacity [Ah]
2.6
Gravimetric energy density [Wh/kg]
​
Gravimetric power density [W/kg]
​
Max continuous discharge [A]
260
Volume [cm³]
​
Mass [g]
​
Positive electrode (cathode)
​
Negative electrode (anode)
​
Value
Gavin 2025 - 2025-06-12T154701_edited.png

Explore and compare 550+ cells for free in our online database

Applications & Use‑Cases

The Molicel XA1 is well suited to the following applications due to its cylindrical 21700 form factor and high power performance.

  • Aviation: Requires high specific energy for extended flight duration, high power-to-weight ratio for climb performance, and reliable operation across wide temperature ranges at altitude.

  • Motorsports: Demands sustained high discharge under competitive load profiles, rapid transient response for acceleration, and thermal stability to maintain performance during race conditions.

  • Drones: Demands high gravimetric power density for thrust and payload capacity, rapid current response for flight control, and stable voltage delivery across dynamic flight profiles.

  • General Applications: Suitable for applications requiring reliable lithium-ion performance with proven cycle life, consistent capacity delivery, and operational safety across diverse use cases.

Performance & Model Data

Below are modelled performance metrics for the Molicel XA1 across key indicators, including constant current behaviour, rate capability, temperature dependence, and available power under representative drive cycle conditions.

Constant Current Voltage

Access Molicel XA1 constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not XA1 data.)

Access Molicel XA1 constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not XA1 data.)

Constant Current Temperature

Access Molicel XA1 thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not XA1 data.)

Access Molicel XA1 thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not XA1 data.)

Pulse Power Behaviour

Access Molicel XA1 pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not XA1 data.)

Access Molicel XA1 pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not XA1 data.)

Dynamic Profile Response

Access Molicel XA1 mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not XA1 data.)

Access Molicel XA1 mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not XA1 data.)

Gavin 2025 (25).png

Run your own battery protocol virtually to cut evaluation time and cost by 70%

Drive Cycle
Track Nurburgring
Load Type
Power Profile
Initial SOC [%]
80
Initial Cell Temperature [°C]
40
Heat Transfer Coefficient [W/m²K]
50

Case Studies

See how we helped McMurtry reduce cell evaluation time by 70% through data driven testing and modelling.

Forbes.jpg
Motorsports

McMurtry Automotive: Faster cell evaluation

McMurtry Automotive used The Voltt and validated cell models to evaluate the transition from the Molicel P45B to P50B during early pack concept development.

 

Side by side modelling enabled rapid comparison of electrical and thermal behaviour, avoiding lengthy physical test campaigns. This approach reduced cell evaluation time by seven months, allowing the team to lock in cell selection and pack assumptions earlier while lowering technical risk and accelerating vehicle development.

 

Comparison with Related Cells

Compare the Molicel XA1 with similar Cylindrical 21700 cells offering comparable capacity and performance characteristics.

Model
Capacity
Max Discharge
Typical Use
Access Cell Data
Molicel XA2
3.5 Ah
315.0 A
Aviation
A123 Systems 21700 S
2.5 Ah
200.0 A
Aviation
Ampace JP40
4.0 Ah
60.0 A
Aviation

Manufacturer Background

Molicel

Molicel is a Taiwanese manufacturer of high-power cylindrical lithium-ion cells

Molicel is the cell brand of E-One Moli Energy, a Taiwanese manufacturer whose technology traces back to lithium battery research begun in Canada in the 1970s. The company produces 18650 and 21700 cylindrical cells designed for high continuous discharge, fast charge acceptance and thermal stability under sustained load. Its P series power cells and higher-capacity variants are used in eVTOL aircraft, motorsport and performance vehicles, power tools and aerospace systems, where discharge rate sets the design limit. Manufacturing is in Taiwan, with research in Canada. In the P series model codes the figure gives the rated capacity, so the P45B is a 4.5 Ah cell.

Frequently Asked Questions

What is the capacity and voltage of the Molicel XA1?

The Molicel XA1 has a nominal capacity of 2.6 Ah, providing 9.36 Wh of energy per cell.

What is the maximum continuous discharge capability of the Molicel XA1?

The Molicel XA1 supports continuous discharge rates up to 260 A.

How much does the Molicel XA1 weigh and what is its volume?

Physical dimensions are not specified for this cell.

In which industries is the Molicel XA1 commonly used?

The Molicel XA1 is used across aviation, motorsports, drones, applications that demand very high power output and thermal management under extreme discharge.

How does the Molicel XA1 compare with the Molicel XA2?

Comparing the Molicel XA1 with the Molicel XA2: capacity 2.6 Ah against 3.5 Ah; maximum continuous discharge 260 A against 315 A. Both datasheets can be compared side by side in The Voltt.

What chemistry and format is the Molicel XA1?

The Molicel XA1 is a cylindrical 21700 cell. Its full datasheet is free to view in The Voltt.

Gavin 2025 (24).png

Explore Detailed Battery Models & Simulations

Access comprehensive performance data, compare cells side by-side, and run custom simulations in The Voltt platform

bottom of page