Raeon uses The Voltt to deliver detailed custom battery pack concepts within 48 hours


From enquiry to a detailed, customer-tailored battery pack proposal in 48 hours
Raeon now answers customer enquiries within days with a full pack concept and simulated performance on the customer’s own mission profile.
Raeon’s leadership can check that a proposed design meets the customer’s requirement within budget before committing to hardware.
Raeon can compare several candidate cells for each enquiry without buying samples or booking lab time, which matters as customers ask for two or three interchangeable cells per programme.
RFQ responses no longer pull engineers off live programmes for lab work, and physical testing is kept for the cells Raeon has already chosen.
London, 17 November 2026: About:Energy, the London battery data and software company, today announced its work with Raeon, a UK-based designer and manufacturer of custom battery modules and packs for defence, marine, UAV and energy storage applications. Raeon uses About:Energy’s cell selection platform, The Voltt, to put simulation-backed pack performance data into customer proposals at the RFQ stage.

Raeon is cell-agnostic and builds packs of any shape and any voltage up to 1000V without tooling. That flexibility is needed to deliver custom solutions to very different customers on short timelines, and it also raises the engineering cost of every bid: Raeon screens far more candidate cells per enquiry than a pack maker tied to one cell, and its customers increasingly ask for two or three interchangeable, multi-sourced cells to protect supply. Datasheets offer little help, because two manufacturers rarely test under the same conditions and no datasheet says how a cell will behave under a specific mission profile.

As enquiry volume grew, so did the cost of answering each one with real data, which usually meant lab time. Each RFQ needed cell-specific electrical and thermal data to show how the pack would perform on the customer’s mission profile, because usable energy, power and cooling are usually fixed at a high level at this stage of a programme. Characterising three candidate cells in the lab for every bid was too slow and expensive to sustain and pulled engineers off live programmes, while leadership needed confidence that a design would meet the requirement within budget before committing to hardware.
Dr Gavin White, Co-founder and Chief Executive Officer of About:Energy, said:
“A cell-agnostic pack maker carries cell evaluation work that a single-cell supplier never sees, and its customers want answers before any hardware exists. Raeon puts simulation results on the customer’s own mission profile into the proposal itself, so the OEM is judging the pack on its expected performance at the RFQ stage.”

Raeon built The Voltt into its commercial and R&D workflow. Engineers run power map and duty cycle simulations against the customer’s mission profile and compare candidate cells on the measures that decide its customers’ pack designs: deliverable power under the real load, thermal performance with and without active cooling, which sets the usable C-rate, and capacity fade under the customer’s own duty cycle.
Raeon puts the simulation outputs into the technical proposal alongside the module design, so an OEM sees how the proposed pack performs on its own mission profile before any hardware is built. The Voltt’s cell library and degradation scenarios also let the team test several cell and pack configurations before committing to one. Where a programme needs more than library data, About:Energy characterises cells for Raeon directly, as it did to support cell selection on a high-performance UAV programme.

Aaron Ridley, Head of Partnerships at Raeon, said:
“Being cell-agnostic only works if you can evaluate candidates quickly and credibly. Working with About:Energy means we can put simulation-backed data in front of a customer at the proposal stage, before a cell has been tested, and that’s changed the quality of our commercial conversations.”
Raeon’s conversion at RFQ stage has also improved, with OEM customers citing the simulation outputs as central to their early design confidence across marine, e-mobility and UAV applications.
About:Energy characterises new commercial cells at its London facility and adds them to The Voltt within four weeks, using the same test protocol for every manufacturer. For a cell-agnostic pack maker, the first pass on a new bid starts from simulation, and the comparison can be re-run quickly when a supplier changes price, lead time or availability. As defence and US-facing customers specify cell origin more often and ask for multi-sourced alternatives, each programme brings more candidate cells to compare, and Raeon can assess them in The Voltt before buying samples.
Company profiles
About:Energy
About:Energy is a London-based battery data and software company transforming how engineering teams design and deploy battery systems. By delivering a full-stack solution that spans cell testing, parameterisation, and model development, About:Energy replaces the need for costly in-house infrastructure and empowers customers to accelerate product development, reduce costs, and make faster, more informed decisions.
With proprietary IP and industry-leading data, About:Energy enables engineering teams across the land, air, and marine sectors to solve complex electrification challenges, including cell selection, fast charging, and pack-level simulation and validation. Recognised as a trusted partner to high-performance companies, About:Energy is helping shape the future of electrification through precision, speed, and deep technical insight.
Media kit: here. Media Contact: media@aboutenergy.co.uk
About Raeon
Raeon designs and manufactures custom battery modules and packs in the UK for defence, marine, UAV/UUV, off-highway, ESS and performance e-mobility. Our patent-pending FloLock cell encapsulation and AnyVolt busbar technology let us build any shape, any size and any voltage up to 1000V with no tooling, which is how we get from enquiry to a 48-hour technical proposal and a first prototype in as little as 12 weeks. We’re cell-agnostic across NMC, LFP, LTO and sodium-ion, with 450+ cell models from 100+ manufacturers, and a standard modular pack range sits alongside the custom work. Over 70% of UN38.3 testing is done in-house.



