top of page

Cylindrical 4695 Cell

Welion SHP800L-35-CYL

Cylindrical 4695 cell delivering 35 Ah capacity with 288 Wh/kg energy density and 105 A maximum discharge rate.

Overview

The Welion SHP800L-35-CYL is a lithium-ion cylindrical 4695 cell designed for applications that demand reliable performance across a broad range of load conditions. Released in 2023 and with the manufacturer based in China, this cylindrical 4695 cell delivers 35 Ah capacity and 125 Wh of energy at a nominal voltage of 3.58 V, with a maximum continuous discharge capability of 105 A, making it suitable for applications that balance runtime against peak power demand.

Key Features

  • Discharge rate: 105 A continuous (3.0 C)

  • Energy density: 288 Wh/kg

  • Power density: 864 W/kg

  • Cathode: Ni-based

  • Applications: drones, aviation, e-mobility

Welion SHP800L-35-CYL 4695 cylindrical lithium-ion battery cell, 35 Ah, 105 A continuous

Technical Specifications from the Manufacturer

Parameter
Manufacturer
Welion
Model
SHP800L-35-CYL
Type
Li-ion
Form factor
Cylindrical 4695
Country of origin
China
Release year
2023
Nominal voltage
3.58
Energy capacity [Wh]
125.3
Capacity [Ah]
35
Gravimetric energy density [Wh/kg]
288
Gravimetric power density [W/kg]
864
Max continuous discharge [A]
105
Volume [cm³]
159.76
Mass [g]
435
Positive electrode (cathode)
Ni-based
Negative electrode (anode)
​
Value
Gavin 2025 - 2025-06-12T154701_edited.png

Explore and compare 550+ cells for free in our online database

Applications & Use‑Cases

The Welion SHP800L-35-CYL is well suited to the following applications due to its cylindrical 4695 form factor and balanced performance.

  • Drones: Demands high gravimetric power density for thrust and payload capacity, rapid current response for flight control, and stable voltage delivery across dynamic flight profiles.

  • Aviation: Requires high specific energy for extended flight duration, high power-to-weight ratio for climb performance, and reliable operation across wide temperature ranges at altitude.

  • E-Mobility: Requires balanced energy and power density for range and acceleration, high cycle life for daily use, and robust calendar life to ensure long-term reliability.

  • General Applications: Suitable for applications requiring reliable lithium-ion performance with proven cycle life, consistent capacity delivery, and operational safety across diverse use cases.

Performance & Model Data

Below are modelled performance metrics for the Welion SHP800L-35-CYL across key indicators, including constant current behaviour, rate capability, temperature dependence, and available power under representative drive cycle conditions.

Constant Current Voltage

Access Welion SHP800L-35-CYL constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not SHP800L-35-CYL data.)

Access Welion SHP800L-35-CYL constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not SHP800L-35-CYL data.)

Constant Current Temperature

Access Welion SHP800L-35-CYL thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not SHP800L-35-CYL data.)

Access Welion SHP800L-35-CYL thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not SHP800L-35-CYL data.)

Pulse Power Behaviour

Access Welion SHP800L-35-CYL pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not SHP800L-35-CYL data.)

Access Welion SHP800L-35-CYL pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not SHP800L-35-CYL data.)

Dynamic Profile Response

Access Welion SHP800L-35-CYL mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not SHP800L-35-CYL data.)

Access Welion SHP800L-35-CYL mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not SHP800L-35-CYL data.)

Gavin 2025 (25).png

Run your own battery protocol virtually to cut evaluation time and cost by 70%

Drive Cycle
Track Nurburgring
Load Type
Power Profile
Initial SOC [%]
80
Initial Cell Temperature [°C]
40
Heat Transfer Coefficient [W/m²K]
50

Case Studies

See how we helped McMurtry reduce cell evaluation time by 70% through data driven testing and modelling.

Forbes.jpg
Motorsports

McMurtry Automotive: Faster cell evaluation

McMurtry Automotive used The Voltt and validated cell models to evaluate the transition from the Molicel P45B to P50B during early pack concept development.

 

Side by side modelling enabled rapid comparison of electrical and thermal behaviour, avoiding lengthy physical test campaigns. This approach reduced cell evaluation time by seven months, allowing the team to lock in cell selection and pack assumptions earlier while lowering technical risk and accelerating vehicle development.

 

Comparison with Related Cells

Compare the Welion SHP800L-35-CYL with similar Cylindrical 4695 cells offering comparable capacity and performance characteristics.

Model
Capacity
Max Discharge
Typical Use
Access Cell Data
Reliance RH320
32.0 Ah
128.0 A
Aviation
Reliance RP450
45.0 Ah
135.0 A
Aviation
Lishen 200EF
20.0 Ah
60.0 A
Aviation

Manufacturer Background

Welion

WeLion is a Chinese developer of semi-solid-state lithium-ion cells

Beijing WeLion New Energy Technology was founded in 2016 as a spin-out from the Institute of Physics at the Chinese Academy of Sciences and develops lithium-ion cells with hybrid solid-liquid electrolytes. The company supplies semi-solid-state cells for high-capacity passenger vehicle packs and high-power pouch cells for drones, eVTOL aircraft and other uncrewed platforms. Its SHP model codes denote high-power variants and carry figures for the energy density class and rated capacity, while ESS-suffixed cells target stationary storage. WeLion has production in Beijing and Zhejiang and is developing all-solid-state chemistry. It ships semi-solid-state cells in commercial volumes.

Frequently Asked Questions

What is the capacity and voltage of the Welion SHP800L-35-CYL?

The Welion SHP800L-35-CYL has a nominal capacity of 35 Ah and a nominal voltage of 3.58 V, providing 125 Wh of energy per cell.

What is the maximum continuous discharge capability of the Welion SHP800L-35-CYL?

The Welion SHP800L-35-CYL supports continuous discharge rates up to 105 A, delivering a power density of 864 W/kg.

How much does the Welion SHP800L-35-CYL weigh and what is its volume?

The cell has a mass of 435 g and a volume of 160 cm³.

In which industries is the Welion SHP800L-35-CYL commonly used?

The Welion SHP800L-35-CYL is used across drones, aviation and e-mobility, applications that demand reliable performance and balanced energy and power.

How does the Welion SHP800L-35-CYL compare with the Reliance RH320?

Comparing the Welion SHP800L-35-CYL with the Reliance RH320: capacity 35 Ah against 32 Ah; maximum continuous discharge 105 A against 128 A. Both datasheets can be compared side by side in The Voltt.

What chemistry and format is the Welion SHP800L-35-CYL?

The Welion SHP800L-35-CYL is a cylindrical 4695 cell with a Ni-based cathode. It has a nominal voltage of 3.58 V and a volume of 160 cm³. Its full datasheet is free to view in The Voltt.

Gavin 2025 (24).png

Explore Detailed Battery Models & Simulations

Access comprehensive performance data, compare cells side by-side, and run custom simulations in The Voltt platform

bottom of page