top of page

Pouch High-Energy Cell

SES H10UE

High-energy pouch cell delivering 11.4 Ah capacity with 431 Wh/kg energy density and 11.4 A maximum discharge rate.

Overview

The SES H10UE is a lithium-ion pouch cell designed for applications that demand long runtime and competitive energy storage. Released in 2026 and with the manufacturer based in the United States, this pouch cell delivers 11.4 Ah capacity and 39 Wh of energy at a nominal voltage of 3.42 V, with a maximum continuous discharge capability of 11.4 A, making it well suited to energy-focused applications requiring extended runtime. Among the pouch cells in the About:Energy battery library, the SES H10UE ranks 16th of 112 for gravimetric energy density. Its 431 Wh/kg compares with a pouch median of 341 Wh/kg.

Key Features

  • Discharge rate: 11.4 A continuous (1.0 C)

  • Energy density: 431 Wh/kg

  • Power density: 431 W/kg

  • Cathode: Ni-based

  • Applications: aviation, e-mobility, energy storage

SES H10UE pouch lithium-ion battery cell, 11.4 Ah, 11.4 A continuous

Technical Specifications from the Manufacturer

Parameter
Manufacturer
SES
Model
H10UE
Type
Li-ion
Form factor
Pouch
Country of origin
United States
Release year
2026
Nominal voltage
3.42
Energy capacity [Wh]
39
Capacity [Ah]
11.4
Gravimetric energy density [Wh/kg]
431
Gravimetric power density [W/kg]
431
Max continuous discharge [A]
11.4
Volume [cm³]
41.8251
Mass [g]
90.5
Positive electrode (cathode)
Ni-based
Negative electrode (anode)
Graphite/Si additive
Value
Gavin 2025 - 2025-06-12T154701_edited.png

Explore and compare 550+ cells for free in our online database

Applications & Use‑Cases

The SES H10UE is well suited to the following applications due to its pouch form factor and high energy density performance.

  • Aviation: Requires high specific energy for extended flight duration, high power-to-weight ratio for climb performance, and reliable operation across wide temperature ranges at altitude.

  • E-Mobility: Requires balanced energy and power density for range and acceleration, high cycle life for daily use, and robust calendar life to ensure long-term reliability.

  • Energy Storage: Requires stable cycle life across deep discharge profiles, reliable calendar life under float conditions, and consistent capacity retention over extended deployment periods.

  • General Applications: Suitable for applications requiring reliable lithium-ion performance with proven cycle life, consistent capacity delivery, and operational safety across diverse use cases.

Performance & Model Data

Below are modelled performance metrics for the SES H10UE across key indicators, including constant current behaviour, rate capability, temperature dependence, and available power under representative drive cycle conditions.

Constant Current Voltage

Access SES H10UE constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not H10UE data.)

Access SES H10UE constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not H10UE data.)

Constant Current Temperature

Access SES H10UE thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not H10UE data.)

Access SES H10UE thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not H10UE data.)

Pulse Power Behaviour

Access SES H10UE pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not H10UE data.)

Access SES H10UE pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not H10UE data.)

Dynamic Profile Response

Access SES H10UE mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not H10UE data.)

Access SES H10UE mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not H10UE data.)

Gavin 2025 (25).png

Run your own battery protocol virtually to cut evaluation time and cost by 70%

Drive Cycle
Track Nurburgring
Load Type
Power Profile
Initial SOC [%]
80
Initial Cell Temperature [°C]
40
Heat Transfer Coefficient [W/m²K]
50

Case Studies

See how we helped McMurtry reduce cell evaluation time by 70% through data driven testing and modelling.

Forbes.jpg
Motorsports

McMurtry Automotive: Faster cell evaluation

McMurtry Automotive used The Voltt and validated cell models to evaluate the transition from the Molicel P45B to P50B during early pack concept development.

 

Side by side modelling enabled rapid comparison of electrical and thermal behaviour, avoiding lengthy physical test campaigns. This approach reduced cell evaluation time by seven months, allowing the team to lock in cell selection and pack assumptions earlier while lowering technical risk and accelerating vehicle development.

 

Comparison with Related Cells

Compare the SES H10UE with similar Pouch cells offering comparable capacity and performance characteristics.

Model
Capacity
Max Discharge
Typical Use
Access Cell Data
Amprius SA109
11.5 Ah
11.5 A
E-Mobility
Amprius SA75
11.8 Ah
11.8 A
E-Mobility
SES H10E
11.8 Ah
23.6 A
E-Mobility

Manufacturer Background

SES AI

SES AI is an American developer of lithium-metal and lithium-ion cells

SES AI was founded in 2012 as SolidEnergy Systems and is headquartered in Boston, Massachusetts, with operations in Singapore, Shanghai and South Korea. The company develops lithium-metal and lithium-ion pouch cells, with electrolyte formulations chosen through its own AI-based materials discovery platform. Its cells are aimed at uncrewed aerial systems, electric aviation and automotive development programmes where energy density is the binding constraint. SES AI also licenses its materials discovery software to other manufacturers. The company is publicly listed and runs joint development programmes with automotive partners to take lithium-metal cells into qualified production.

Frequently Asked Questions

What is the capacity and voltage of the SES H10UE?

The SES H10UE has a nominal capacity of 11.4 Ah and a nominal voltage of 3.42 V, providing 39 Wh of energy per cell.

What is the maximum continuous discharge capability of the SES H10UE?

The SES H10UE supports continuous discharge rates up to 11.4 A, delivering a power density of 431 W/kg.

How much does the SES H10UE weigh and what is its volume?

The cell has a mass of 90.5 g and a volume of 41.8 cm³.

In which industries is the SES H10UE commonly used?

The SES H10UE is used across aviation, e-mobility and energy storage, applications that demand high energy density and consistent performance over extended cycles.

How does the SES H10UE compare with the Amprius SA109?

Comparing the SES H10UE with the Amprius SA109: capacity 11.4 Ah against 11.5 Ah; maximum continuous discharge 11.4 A against 11.5 A; energy density 431 Wh/kg against 445 Wh/kg; mass 90.5 g against 88 g. Both datasheets can be compared side by side in The Voltt.

What chemistry and format is the SES H10UE?

The SES H10UE is a pouch cell with a Ni-based cathode and a Graphite/Si additive anode. It has a nominal voltage of 3.42 V and a volume of 41.8 cm³. Its full datasheet is free to view in The Voltt.

Gavin 2025 (24).png

Explore Detailed Battery Models & Simulations

Access comprehensive performance data, compare cells side by-side, and run custom simulations in The Voltt platform

bottom of page