top of page

Cylindrical 21700 High-Power Cell

Rincell RC50T

High-power cylindrical 21700 cell delivering 5.2 Ah capacity with 267 Wh/kg energy density and 100 A maximum discharge rate.

Overview

The Rincell RC50T is a high-power lithium-ion cylindrical 21700 cell designed for applications that demand sustained high current and high energy density. Released in 2026 and with the manufacturer based in the United States, this cylindrical 21700 cell delivers 5.2 Ah capacity and 18.7 Wh of energy at a nominal voltage of 3.6 V, with a maximum continuous discharge capability of 100 A, making it well suited to high-power systems operating under aggressive load profiles. Among the 21700 cylindrical cells in the About:Energy battery library, the Rincell RC50T ranks 7th of 125 for maximum continuous discharge. Its 100 A compares with a 21700 cylindrical median of 35 A.

Key Features

  • Extremely high discharge rate: 100 A continuous (19.2 C)

  • Energy density: 267 Wh/kg

  • Power density: 5,143 W/kg

  • Cathode: Ni-based (high Ni)

  • Applications: aviation, motorsports, e-mobility

Rincell RC50T 21700 cylindrical lithium-ion battery cell, 5.2 Ah, 100 A continuous

Technical Specifications from the Manufacturer

Parameter
Manufacturer
Rincell
Model
RC50T
Type
Li-ion
Form factor
Cylindrical 21700
Country of origin
United States
Release year
2026
Nominal voltage
3.6
Energy capacity [Wh]
18.72
Capacity [Ah]
5.2
Gravimetric energy density [Wh/kg]
267
Gravimetric power density [W/kg]
5143
Max continuous discharge [A]
100
Volume [cm³]
25.595
Mass [g]
70
Positive electrode (cathode)
Ni-based (high Ni)
Negative electrode (anode)
Graphite/Si additive
Value
Gavin 2025 - 2025-06-12T154701_edited.png

Explore and compare 550+ cells for free in our online database

Applications & Use‑Cases

The Rincell RC50T is well suited to the following applications due to its cylindrical 21700 and high power performance.

  • Aviation: Requires high specific energy for extended flight duration, high power-to-weight ratio for climb performance, and reliable operation across wide temperature ranges at altitude.

  • Motorsports: Demands sustained high discharge under competitive load profiles, rapid transient response for acceleration, and thermal stability to maintain performance during race conditions.

  • E-Mobility: Requires balanced energy and power density for range and acceleration, high cycle life for daily use, and robust calendar life to ensure long-term reliability.

  • General Applications: Suitable for applications requiring reliable lithium-ion performance with proven cycle life, consistent capacity delivery, and operational safety across diverse use cases.

Performance & Model Data

Below are modelled performance metrics for the Rincell RC50T across key indicators, including constant current behaviour, rate capability, temperature dependence, and available power under representative drive cycle conditions.

Constant Current Voltage

Access Rincell RC50T constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not RC50T data.)

Access Rincell RC50T constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not RC50T data.)

Constant Current Temperature

Access Rincell RC50T thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not RC50T data.)

Access Rincell RC50T thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not RC50T data.)

Pulse Power Behaviour

Access Rincell RC50T pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not RC50T data.)

Access Rincell RC50T pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not RC50T data.)

Dynamic Profile Response

Access Rincell RC50T mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not RC50T data.)

Access Rincell RC50T mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not RC50T data.)

Gavin 2025 (25).png

Run your own battery protocol virtually to cut evaluation time and cost by 70%

Drive Cycle
Track Nurburgring
Load Type
Power Profile
Initial SOC [%]
80
Initial Cell Temperature [°C]
40
Heat Transfer Coefficient [W/m²K]
50

Case Studies

See how we helped McMurtry reduce cell evaluation time by 70% through data driven testing and modelling.

Forbes.jpg
Motorsports

McMurtry Automotive: Faster cell evaluation

McMurtry Automotive used The Voltt and validated cell models to evaluate the transition from the Molicel P45B to P50B during early pack concept development.

 

Side by side modelling enabled rapid comparison of electrical and thermal behaviour, avoiding lengthy physical test campaigns. This approach reduced cell evaluation time by seven months, allowing the team to lock in cell selection and pack assumptions earlier while lowering technical risk and accelerating vehicle development.

 

Comparison with Related Cells

Compare the Rincell RC50T with similar Cylindrical 21700 cells offering comparable capacity and performance characteristics.

Model
Capacity
Max Discharge
Typical Use
Access Cell Data
Ampace JP50
5.0 Ah
60.0 A
Aviation
Molicel P50S
5.0 Ah
100.0 A
Aviation
Reliance RU50
5.0 Ah
70.0 A
Aviation

Manufacturer Background

Rincell

Rincell is an American silicon-graphite lithium-ion and sodium-ion cell manufacturer

Rincell is a battery developer headquartered in San Francisco, California, producing cylindrical cells with silicon-graphite anodes. Its RC series covers 18650 and 21700 formats in energy-led and high-rate versions, designed for fast charging, long cycle life and operation well below freezing. The company has added high-power sodium-ion cells for applications where cost and low-temperature behaviour matter more than energy density. Rincell is commissioning cell manufacturing in California to supply customers that require domestic production. Its sodium-ion cells carry the SIB prefix in their model codes.

Frequently Asked Questions

What is the capacity and voltage of the Rincell RC50T?

The Rincell RC50T has a nominal capacity of 5.2 Ah and a nominal voltage of 3.6 V, providing 18.7 Wh of energy per cell.

What is the maximum continuous discharge capability of the Rincell RC50T?

The Rincell RC50T supports continuous discharge rates up to 100 A, delivering exceptional power density of 5,143 W/kg.

How much does the Rincell RC50T weigh and what is its volume?

The cell has a mass of 70 g and a volume of 25.6 cm³.

In which industries is the Rincell RC50T commonly used?

The Rincell RC50T is used across eVTOL, motorsports, drones, and e-mobility, applications that demand both high energy and power density.

How does the Rincell RC50T compare with the Ampace JP50?

Comparing the Rincell RC50T with the Ampace JP50: capacity 5.2 Ah against 5 Ah; maximum continuous discharge 100 A against 60 A; energy density 267 Wh/kg against 249 Wh/kg; mass 70 g against 72 g. Both datasheets can be compared side by side in The Voltt.

What chemistry and format is the Rincell RC50T?

The Rincell RC50T is a cylindrical 21700 cell with a Ni-based (high Ni) cathode and a Graphite/Si additive anode. It has a nominal voltage of 3.6 V and a volume of 25.6 cm³. Its full datasheet is free to view in The Voltt.

Gavin 2025 (24).png

Explore Detailed Battery Models & Simulations

Access comprehensive performance data, compare cells side by-side, and run custom simulations in The Voltt platform

bottom of page