Pouch Cell
Lionvolt 400FCS
Pouch cell delivering 19.5 Ah capacity with 403 Wh/kg energy density and 58.5 A maximum discharge rate.
Overview
The Lionvolt LVE-400FCS is a lithium-ion pouch cell designed for applications that demand reliable performance across a broad range of load conditions. This pouch cell delivers 19.5 Ah capacity and 73.3 Wh of energy at a nominal voltage of 3.76 V, with a maximum continuous discharge capability of 58.5 A, making it suitable for applications that balance runtime against peak power demand. Among the pouch cells in the About:Energy battery library, the Lionvolt 400FCS ranks 30th of 152 for gravimetric energy density. Its 403 Wh/kg compares with a pouch median of 333 Wh/kg.
Key Features
Discharge rate: 58.5 A continuous (3.0 C)
Energy density: 403 Wh/kg
Power density: 1,209 W/kg
Applications: drones, aviation, e-mobility

Technical Specifications from the Manufacturer
Parameter
Manufacturer
Lionvolt
Model
LVE-400FCS
Type
Form factor
Pouch
Country of origin
Release year
Nominal voltage
3.76
Energy capacity [Wh]
73.32
Capacity [Ah]
19.5
Gravimetric energy density [Wh/kg]
403
Gravimetric power density [W/kg]
1209
Max continuous discharge [A]
58.5
Volume [cm³]
87.892
Mass [g]
182
Positive electrode (cathode)
Negative electrode (anode)
Value

Applications & Use‑Cases
The Lionvolt 400FCS is well suited to the following applications due to its pouch form factor and balanced performance.
Drones: Demands high gravimetric power density for thrust and payload capacity, rapid current response for flight control, and stable voltage delivery across dynamic flight profiles.
Aviation: Requires high specific energy for extended flight duration, high power-to-weight ratio for climb performance, and reliable operation across wide temperature ranges at altitude.
E-Mobility: Requires balanced energy and power density for range and acceleration, high cycle life for daily use, and robust calendar life to ensure long-term reliability.
General Applications: Suitable for applications requiring reliable lithium-ion performance with proven cycle life, consistent capacity delivery, and operational safety across diverse use cases.
Performance & Model Data
Below are modelled performance metrics for the Lionvolt 400FCS across key indicators, including constant current behaviour, rate capability, temperature dependence, and available power under representative drive cycle conditions.
Constant Current Voltage

Access Lionvolt 400FCS constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not 400FCS data.)
Constant Current Temperature

Access Lionvolt 400FCS thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not 400FCS data.)
Pulse Power Behaviour

Access Lionvolt 400FCS pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not 400FCS data.)
Dynamic Profile Response

Access Lionvolt 400FCS mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not 400FCS data.)
Case Studies
See how we helped McMurtry reduce cell evaluation time by 70% through data driven testing and modelling.

Motorsports
McMurtry Automotive: Faster cell evaluation
McMurtry Automotive used The Voltt and validated cell models to evaluate the transition from the Molicel P45B to P50B during early pack concept development.
Side by side modelling enabled rapid comparison of electrical and thermal behaviour, avoiding lengthy physical test campaigns. This approach reduced cell evaluation time by seven months, allowing the team to lock in cell selection and pack assumptions earlier while lowering technical risk and accelerating vehicle development.
Comparison with Related Cells
Compare the Lionvolt 400FCS with similar Pouch cells offering comparable capacity and performance characteristics.
Model
Capacity
Max Discharge
Typical Use
Access Cell Data
Manufacturer Background
LionVolt
LionVolt is a Dutch developer of 3D solid-state lithium battery cells
LionVolt is a battery technology company on the High Tech Campus in Eindhoven, the Netherlands, founded in 2020 as a spin-off from TNO at Holst Centre. Its cells replace a flat electrode stack with a three-dimensional structure of microscopic pillars coated in thin functional layers, which gives a large active surface area. The company pairs this architecture with solid-state materials for fast charging, high power and improved safety compared with liquid-electrolyte cells. Funding rounds in 2021 and 2024 have supported the move towards pilot production in the Eindhoven region. The 400FCS pouch cell is an early product from this programme.
Frequently Asked Questions
What is the capacity and voltage of the Lionvolt 400FCS?
The Lionvolt 400FCS has a nominal capacity of 19.5 Ah and a nominal voltage of 3.76 V, providing 73.3 Wh of energy per cell.
What is the maximum continuous discharge capability of the Lionvolt 400FCS?
The Lionvolt 400FCS supports continuous discharge rates up to 58.5 A, delivering a power density of 1,209 W/kg.
How much does the Lionvolt 400FCS weigh and what is its volume?
The cell has a mass of 182 g and a volume of 87.9 cm³.
In which industries is the Lionvolt 400FCS commonly used?
The Lionvolt 400FCS is used across drones, aviation and e-mobility, applications that demand reliable performance and balanced energy and power.
How does the Lionvolt 400FCS compare with the Welion SHP320-20?
Comparing the Lionvolt 400FCS with the Welion SHP320-20: capacity 19.5 Ah against 20 Ah; maximum continuous discharge 58.5 A against 100 A; energy density 403 Wh/kg against 286 Wh/kg; mass 182 g against 255 g. Both datasheets can be compared side by side in The Voltt.
What chemistry and format is the Lionvolt 400FCS?
The Lionvolt 400FCS is a pouch cell. It has a nominal voltage of 3.76 V and a volume of 87.9 cm³. Its full datasheet is free to view in The Voltt.



.jpg)
.png)

