top of page

Pouch High-Energy Cell

Grepow GRP8082133

High-energy pouch cell delivering 15.8 Ah capacity with 340 Wh/kg energy density and 15.8 A maximum discharge rate.

Overview

The Grepow GRP8082133 is a lithium-ion pouch cell designed for applications that demand high energy density and consistent capacity delivery. With the manufacturer based in China, this pouch cell delivers 15.8 Ah capacity and 58.5 Wh of energy at a nominal voltage of 3.7 V, with a maximum continuous discharge capability of 15.8 A, making it well suited to energy-focused applications requiring extended runtime.

Key Features

  • Discharge rate: 15.8 A continuous (1.0 C)

  • Energy density: 340 Wh/kg

  • Power density: 340 W/kg

  • Cathode: Ni-based

  • Applications: aviation, e-mobility, energy storage

Grepow GRP8082133 pouch lithium-ion battery cell, 15.8 Ah, 15.8 A continuous

Technical Specifications from the Manufacturer

Parameter
Manufacturer
Grepow
Model
GRP8082133
Type
Li-ion
Form factor
Pouch
Country of origin
China
Release year
​
Nominal voltage
3.7
Energy capacity [Wh]
58.46
Capacity [Ah]
15.8
Gravimetric energy density [Wh/kg]
340
Gravimetric power density [W/kg]
340
Max continuous discharge [A]
15.8
Volume [cm³]
83.4641
Mass [g]
172
Positive electrode (cathode)
Ni-based
Negative electrode (anode)
​
Value
Gavin 2025 - 2025-06-12T154701_edited.png

Explore and compare 550+ cells for free in our online database

Applications & Use‑Cases

The Grepow GRP8082133 is well suited to the following applications due to its pouch form factor and high energy density performance.

  • Aviation: Requires high specific energy for extended flight duration, high power-to-weight ratio for climb performance, and reliable operation across wide temperature ranges at altitude.

  • E-Mobility: Requires balanced energy and power density for range and acceleration, high cycle life for daily use, and robust calendar life to ensure long-term reliability.

  • Energy Storage: Requires stable cycle life across deep discharge profiles, reliable calendar life under float conditions, and consistent capacity retention over extended deployment periods.

  • General Applications: Suitable for applications requiring reliable lithium-ion performance with proven cycle life, consistent capacity delivery, and operational safety across diverse use cases.

Performance & Model Data

Below are modelled performance metrics for the Grepow GRP8082133 across key indicators, including constant current behaviour, rate capability, temperature dependence, and available power under representative drive cycle conditions.

Constant Current Voltage

Access Grepow GRP8082133 constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not GRP8082133 data.)

Access Grepow GRP8082133 constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not GRP8082133 data.)

Constant Current Temperature

Access Grepow GRP8082133 thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not GRP8082133 data.)

Access Grepow GRP8082133 thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not GRP8082133 data.)

Pulse Power Behaviour

Access Grepow GRP8082133 pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not GRP8082133 data.)

Access Grepow GRP8082133 pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not GRP8082133 data.)

Dynamic Profile Response

Access Grepow GRP8082133 mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not GRP8082133 data.)

Access Grepow GRP8082133 mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not GRP8082133 data.)

Gavin 2025 (25).png

Run your own battery protocol virtually to cut evaluation time and cost by 70%

Drive Cycle
Track Nurburgring
Load Type
Power Profile
Initial SOC [%]
80
Initial Cell Temperature [°C]
40
Heat Transfer Coefficient [W/m²K]
50

Case Studies

See how we helped McMurtry reduce cell evaluation time by 70% through data driven testing and modelling.

Forbes.jpg
Motorsports

McMurtry Automotive: Faster cell evaluation

McMurtry Automotive used The Voltt and validated cell models to evaluate the transition from the Molicel P45B to P50B during early pack concept development.

 

Side by side modelling enabled rapid comparison of electrical and thermal behaviour, avoiding lengthy physical test campaigns. This approach reduced cell evaluation time by seven months, allowing the team to lock in cell selection and pack assumptions earlier while lowering technical risk and accelerating vehicle development.

 

Comparison with Related Cells

Compare the Grepow GRP8082133 with similar Pouch cells offering comparable capacity and performance characteristics.

Model
Capacity
Max Discharge
Typical Use
Access Cell Data
Amprius SA34
17.6 Ah
18.0 A
E-Mobility
Enpower Greentech XNP0150J
15.0 Ah
45.0 A
Aviation
BEI MUL16A
17.0 Ah
80.0 A
Aviation

Manufacturer Background

Grepow

Grepow is a Chinese lithium polymer pouch cell manufacturer specialising in high-discharge cells

Grepow was founded in 1998 and is headquartered in Shenzhen, producing lithium polymer pouch cells and complete battery packs. The company is best known for high-discharge cells used in drones, radio-controlled models and other uncrewed platforms, sold under its Tattu and Gens Ace brands as well as to OEM customers. Its GRP model codes encode cell thickness, width and length in millimetres, reflecting a catalogue built around custom and shaped pouch formats. Grepow also produces low-temperature, high-voltage and semi-solid-state variants for industrial and medical use. Its relevance rests on volume production of high-rate pouch cells in formats the large cylindrical manufacturers do not serve.

Frequently Asked Questions

What is the capacity and voltage of the Grepow GRP8082133?

The Grepow GRP8082133 has a nominal capacity of 15.8 Ah and a nominal voltage of 3.7 V, providing 58.5 Wh of energy per cell.

What is the maximum continuous discharge capability of the Grepow GRP8082133?

The Grepow GRP8082133 supports continuous discharge rates up to 15.8 A, delivering a power density of 340 W/kg.

How much does the Grepow GRP8082133 weigh and what is its volume?

The cell has a mass of 172 g and a volume of 83.5 cm³.

In which industries is the Grepow GRP8082133 commonly used?

The Grepow GRP8082133 is used across aviation, e-mobility and energy storage, applications that demand high energy density and consistent performance over extended cycles.

How does the Grepow GRP8082133 compare with the Amprius SA34?

Comparing the Grepow GRP8082133 with the Amprius SA34: capacity 15.8 Ah against 17.6 Ah; maximum continuous discharge 15.8 A against 18 A; energy density 340 Wh/kg against 367 Wh/kg; mass 172 g against 163.2 g. Both datasheets can be compared side by side in The Voltt.

What chemistry and format is the Grepow GRP8082133?

The Grepow GRP8082133 is a pouch cell with a Ni-based cathode. It has a nominal voltage of 3.7 V and a volume of 83.5 cm³. Its full datasheet is free to view in The Voltt.

Gavin 2025 (24).png

Explore Detailed Battery Models & Simulations

Access comprehensive performance data, compare cells side by-side, and run custom simulations in The Voltt platform

bottom of page