Pouch Cell
Enpower Greentech LNP0035M
Pouch cell delivering 3.5 Ah capacity with 398 Wh/kg energy density and 10.5 A maximum discharge rate.
Overview
The Enpower Greentech LNP0035M is a lithium-metal pouch cell designed for applications that demand reliable performance across a broad range of load conditions. Released in 2023 and with the manufacturer based in the United States, this pouch cell delivers 3.5 Ah capacity and 13.4 Wh of energy at a nominal voltage of 3.84 V, with a maximum continuous discharge capability of 10.5 A, making it suitable for applications that balance runtime against peak power demand. Among the pouch cells in the About:Energy battery library, the Enpower Greentech LNP0035M ranks 20th of 104 for gravimetric energy density. Its 398 Wh/kg compares with a pouch median of 341 Wh/kg.
Key Features
Discharge rate: 10.5 A continuous (3.0 C)
Energy density: 398 Wh/kg
Power density: 1,193 W/kg
Cathode: Ni-based
Applications: drones, aviation, e-mobility
Technical Specifications from the Manufacturer
Parameter
Manufacturer
Enpower Greentech
Model
LNP0035M
Type
Li Metal
Form factor
Pouch
Country of origin
United States
Release year
2023
Nominal voltage
3.84
Energy capacity [Wh]
13.44
Capacity [Ah]
3.5
Gravimetric energy density [Wh/kg]
398
Gravimetric power density [W/kg]
1193
Max continuous discharge [A]
10.5
Volume [cm³]
24.03
Mass [g]
33.8
Positive electrode (cathode)
Ni-based
Negative electrode (anode)
Value
Applications & Use‑Cases
The Enpower Greentech LNP0035M is well suited to the following applications due to its pouch form factor and balanced performance.
Drones: Demands high gravimetric power density for thrust and payload capacity, rapid current response for flight control, and stable voltage delivery across dynamic flight profiles.
Aviation: Requires high specific energy for extended flight duration, high power-to-weight ratio for climb performance, and reliable operation across wide temperature ranges at altitude.
E-Mobility: Requires balanced energy and power density for range and acceleration, high cycle life for daily use, and robust calendar life to ensure long-term reliability.
General Applications: Suitable for applications requiring reliable lithium-ion performance with proven cycle life, consistent capacity delivery, and operational safety across diverse use cases.
.jpg)
Performance & Model Data
Below are modelled performance metrics for the Enpower Greentech LNP0035M across key indicators, including constant current behaviour, rate capability, temperature dependence, and available power under representative drive cycle conditions.
Constant Current Voltage
Access Enpower Greentech LNP0035M constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not LNP0035M data.)
Constant Current Temperature
Access Enpower Greentech LNP0035M thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not LNP0035M data.)
Pulse Power Behaviour
Access Enpower Greentech LNP0035M pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not LNP0035M data.)
Dynamic Profile Response
Access Enpower Greentech LNP0035M mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not LNP0035M data.)
.png)
Case Studies
See how we helped McMurtry reduce cell evaluation time by 70% through data driven testing and modelling.
Motorsports
McMurtry Automotive: Faster cell evaluation
McMurtry Automotive used The Voltt and validated cell models to evaluate the transition from the Molicel P45B to P50B during early pack concept development.
Side by side modelling enabled rapid comparison of electrical and thermal behaviour, avoiding lengthy physical test campaigns. This approach reduced cell evaluation time by seven months, allowing the team to lock in cell selection and pack assumptions earlier while lowering technical risk and accelerating vehicle development.
Comparison with Related Cells
Compare the Enpower Greentech LNP0035M with similar Pouch cells offering comparable capacity and performance characteristics.
Model
Capacity
Max Discharge
Typical Use
Access Cell Data
Manufacturer Background
Enpower Greentech
Enpower Greentech is an American developer of lithium-metal and solid-state cells
Enpower Greentech was founded in California in 2012 and develops lithium-metal and all-solid-state batteries alongside the key materials they depend on. Its research and manufacturing centres are based in China and Japan, with further operations in the United States and Germany. The company produces lithium-metal pouch cells at energy densities well beyond conventional graphite-anode lithium-ion, including some of the lightest high-capacity lithium-metal cells built to date, aimed at uncrewed aircraft and other endurance-limited platforms. Its technical programme has drawn on collaborations with academic groups in the United States and Japan, and the company is venture backed. Enpower sits among the developers moving lithium-metal chemistry from demonstrators into qualified production cells.
Frequently Asked Questions
What is the capacity and voltage of the Enpower Greentech LNP0035M?
The Enpower Greentech LNP0035M has a nominal capacity of 3.5 Ah and a nominal voltage of 3.84 V, providing 13.4 Wh of energy per cell.
What is the maximum continuous discharge capability of the Enpower Greentech LNP0035M?
The Enpower Greentech LNP0035M supports continuous discharge rates up to 10.5 A, delivering a power density of 1,193 W/kg.
How much does the Enpower Greentech LNP0035M weigh and what is its volume?
The cell has a mass of 33.8 g and a volume of 24 cm³.
In which industries is the Enpower Greentech LNP0035M commonly used?
The Enpower Greentech LNP0035M is used across drones, aviation and e-mobility, applications that demand reliable performance and balanced energy and power.
How does the Enpower Greentech LNP0035M compare with the SES H4B?
Comparing the Enpower Greentech LNP0035M with the SES H4B: capacity 3.5 Ah against 3.9 Ah; maximum continuous discharge 10.5 A against 15.6 A; energy density 398 Wh/kg against 365 Wh/kg; mass 33.8 g against 36.3 g. Both datasheets can be compared side by side in The Voltt.
What chemistry and format is the Enpower Greentech LNP0035M?
The Enpower Greentech LNP0035M is a pouch cell with a Ni-based cathode. It has a nominal voltage of 3.84 V and a volume of 24 cm³. Its full datasheet is free to view in The Voltt.
