Pouch High-Power Cell
Advantelec EP260-10.2
Pouch cell delivering 10.2 Ah capacity, 258 Wh/kg energy density and 102 A maximum discharge rate.
Overview
The Advantelec EP260-10.2 is a high-power Li-ion pouch cell designed for applications that demand sustained high current. Released in 2026 and with the manufacturer based in France, this pouch cell delivers 10.2 Ah capacity and 40 Wh of energy at a nominal voltage of 3.92 V, with a maximum continuous discharge capability of 102 A, making it well suited to high-power systems. The pouch format allows the pack designer to trade cell thickness against footprint. Its 102 A maximum continuous discharge is above the pouch median of 75 A in the About:Energy battery library.
Key Features
High discharge rate: 102 A continuous (10.0 C)
Energy density: 258 Wh/kg
Power density: 2,580 W/kg
Capacity: 10.2 Ah nominal capacity
Applications: drones, motorsports, e-mobility
Technical Specifications from the Manufacturer
Parameter
Manufacturer
Advantelec
Model
EP260-10.2
Type
Li-ion
Form factor
Pouch
Country of origin
France
Release year
2026
Nominal voltage
3.92
Energy capacity [Wh]
39.984
Capacity [Ah]
10.2
Gravimetric energy density [Wh/kg]
258
Gravimetric power density [W/kg]
2580
Max continuous discharge [A]
102
Volume [cm³]
75.46
Mass [g]
155
Positive electrode (cathode)
LCO
Negative electrode (anode)
Graphite
Value
Applications & Use‑Cases
The Advantelec EP260-10.2 is well suited to the following applications due to its pouch format and high power performance.
Drones: Demands high gravimetric power density for thrust and payload capacity, rapid current response for flight control, and stable voltage delivery across dynamic flight profiles.
Motorsports: Demands sustained high discharge under competitive load profiles, rapid transient response for acceleration, and thermal stability to maintain performance during race conditions.
E-Mobility: Requires balanced energy and power density for range and acceleration, high cycle life for daily use, and robust calendar life to ensure long-term reliability.
General Applications: Suitable for applications requiring reliable lithium-ion performance with proven cycle life, consistent capacity delivery, and operational safety across diverse use cases.
.jpg)
Performance & Model Data
Below are modelled performance metrics for the Advantelec EP260-10.2 across key indicators, including constant current behaviour, rate capability, temperature dependence, and available power under representative drive cycle conditions.
Constant Current Voltage
Access Advantelec EP260-10.2 constant-current discharge curves in Voltt to size your pack against the voltage window your system actually needs. (Chart shown is illustrative, not EP260-10.2 data.)
Constant Current Temperature
Access Advantelec EP260-10.2 thermal discharge data in Voltt to specify cooling and cell spacing before you commit to a pack layout. (Chart shown is illustrative, not EP260-10.2 data.)
Pulse Power Behaviour
Access Advantelec EP260-10.2 pulse power maps in Voltt to set peak current limits and parallel count for your worst-case load. (Chart shown is illustrative, not EP260-10.2 data.)
Dynamic Profile Response
Access Advantelec EP260-10.2 mission profile simulations in Voltt to prove the pack holds up over a real duty cycle before you build it. (Chart shown is illustrative, not EP260-10.2 data.)
.png)
Case Studies
See how we helped McMurtry reduce cell evaluation time by 70% through data driven testing and modelling.
Motorsports
McMurtry Automotive: Faster cell evaluation
McMurtry Automotive used The Voltt and validated cell models to evaluate the transition from the Molicel P45B to P50B during early pack concept development.
Side by side modelling enabled rapid comparison of electrical and thermal behaviour, avoiding lengthy physical test campaigns. This approach reduced cell evaluation time by seven months, allowing the team to lock in cell selection and pack assumptions earlier while lowering technical risk and accelerating vehicle development.
Comparison with Related Cells
Compare the Advantelec EP260-10.2 with similar Pouch cells offering comparable capacity and performance characteristics.
Model
Capacity
Max Discharge
Typical Use
Access Cell Data
Manufacturer Background
Advantelec
Advantelec is a French lithium-ion pouch cell and battery system manufacturer
Advantelec was founded in 2011 and is headquartered in Vénissieux near Lyon, where it designs lithium-ion pouch cells, battery packs with integrated management systems and the supporting electronics. Its ADV-POWER range spans NMC and semi-solid-state pouch chemistries, with high-energy variants aimed at weight-limited platforms. The company supplies rugged battery systems for uncrewed aerial vehicles, medical instrumentation and industrial equipment, where certification and traceability matter as much as raw performance. In 2024 Advantelec commissioned a pilot cell production line near Lyon, moving from pack integration into domestic cell manufacture. That step makes it one of a small number of European producers offering sovereign supply of high-energy pouch cells.
Frequently Asked Questions
What is the capacity and voltage of the Advantelec EP260-10.2?
The Advantelec EP260-10.2 has a nominal capacity of 10.2 Ah and a nominal voltage of 3.92 V, providing 40 Wh of energy per cell.
What is the maximum continuous discharge capability of the Advantelec EP260-10.2?
The Advantelec EP260-10.2 supports continuous discharge rates up to 102 A, delivering a power density of 2,580 W/kg.
How much does the Advantelec EP260-10.2 weigh and what is its volume?
The cell has a mass of 155 g and a volume of 75.5 cm³.
In which industries is the Advantelec EP260-10.2 commonly used?
The Advantelec EP260-10.2 is used across drones, motorsports, e-mobility, applications that demand sustained high current.
How does the Advantelec EP260-10.2 compare with the Elevate E13?
Comparing the Advantelec EP260-10.2 with the Elevate E13: capacity 10.2 Ah against 13 Ah; maximum continuous discharge 102 A against 130 A; energy density 258 Wh/kg against 323 Wh/kg; mass 155 g against 139.5 g. Both datasheets can be compared side by side in The Voltt.
What chemistry and format is the Advantelec EP260-10.2?
The Advantelec EP260-10.2 is a pouch cell with a LCO cathode and a Graphite anode. It has a nominal voltage of 3.92 V and a volume of 75.5 cm³. Its full datasheet is free to view in The Voltt.
